QTE-060-01-F-D-A-SD Equivalent & Substitute Parts

Part Overview

The QTE-060-01-F-D-A-SD is a 120-position rectangular connector header manufactured by Samtec Inc. as part of the Q Strip® QTE series. This surface mount connector features outer shroud contacts with gold plating and is designed for applications requiring high-density interconnection on printed circuit boards. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector family, enabling component interchangeability in design and procurement workflows.

Substiute Parts

QTE-060-01-F-D-A-SD

Samtec Inc.In Stock: 752QTE-060-01-F-D-A-SD Datasheet

Current PartRFQ

QTE-060-01-F-D-A

Samtec Inc.In Stock: 852QTE-060-01-F-D-A Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the QTE-060-01-F-D-A-SD is determined by strict equivalence across the following critical parameters:

• Connector Position Count: 120 positions
• Pitch Specification: 0.031" (0.80mm)
• Row Configuration: 2 rows
• Contact Finish: Gold plating at 3.00µin thickness
• Mounting Technology: Surface mount configuration
• Connector Architecture: Header with outer shroud contacts
• Physical Envelope: Height above board of 0.168" (4.27mm)
• Regulatory Compliance: ROHS3 compliance and MSL 1 rating

Parts meeting all these parameters within the Q Strip® QTE series are classified as parametric equivalents and direct substitutes. Variations in packaging format (Tray) do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both QTE-060-01-F-D-A-SD and QTE-060-01-F-D-A maintain Active product status within the Samtec Q Strip® QTE connector family. Both parts satisfy ROHS3 compliance requirements and carry MSL 1 rating, indicating no moisture sensitivity restrictions during storage and handling. Selection between these parts may be based on inventory availability and packaging format preferences, as all electrical and mechanical specifications are identical. The QTE-060-01-F-D-A-SD currently maintains 683 units in stock, while QTE-060-01-F-D-A maintains 808 units in stock.

Frequently Asked Questions (FAQ)

Q: Can QTE-060-01-F-D-A be used as a direct replacement for QTE-060-01-F-D-A-SD?

A: Yes. Both parts are parametric equivalents with identical electrical and mechanical specifications, including position count, pitch, row configuration, contact finish, mounting type, and physical dimensions. They are interchangeable in circuit design and assembly applications.

Q: What determines substitution eligibility for this connector family?

A: Substitution is determined by equivalence across position count (120), pitch (0.031"), row configuration (2), contact finish (gold at 3.00µin), mounting type (surface mount), connector type (header with outer shroud), and physical envelope specifications. All these parameters must match exactly.

Q: Are there differences in compliance or regulatory status between these parts?

A: No. Both parts carry identical ROHS3 compliance status, MSL 1 rating, and Active product status. Regulatory and environmental certifications are equivalent.

Q: Does packaging format affect compatibility?

A: No. Both parts are supplied in Tray packaging. Packaging format does not affect electrical or mechanical compatibility in circuit applications.

Q: What is the significance of the "-SD" suffix in QTE-060-01-F-D-A-SD?

A: The "-SD" suffix represents a specific configuration variant within the base product number QTE-060. However, the parametric equivalent QTE-060-01-F-D-A maintains all critical electrical and mechanical specifications required for direct substitution.