QSE-060-01-L-D-A-TR Equivalent & Substitute Parts

Part Overview

The QSE-060-01-L-D-A-TR is a 120-position rectangular connector receptacle manufactured by Samtec Inc. as part of the Q Strip® QSE series. This surface mount connector features center strip contacts with gold plating and is designed for applications requiring high-density interconnection with multiple mating stacking height options. The part is currently active in production status with full RoHS3 compliance and unlimited moisture sensitivity rating. Identifying equivalent and substitute parts is necessary when managing supply chain continuity, optimizing inventory levels, or accommodating packaging format preferences across manufacturing environments.

Substiute Parts

QSE-060-01-L-D-A-TR

Samtec Inc.In Stock: 1400QSE-060-01-L-D-A-TR Datasheet

Current PartRFQ

QSE-060-01-L-D-A

Samtec Inc.In Stock: 2010QSE-060-01-L-D-A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the QSE-060-01-L-D-A-TR are identified based on electrical and mechanical parameter equivalence within the Q Strip® QSE series. The primary substitution criterion is packaging format. The QSE-060-01-L-D-A-TR is supplied in Cut Tape (CT) packaging, while equivalent parts may be available in alternative packaging configurations such as Tray format.

Substitution is valid when the following parameters remain identical:

• Connector type (Receptacle, Center Strip Contacts)
• Number of positions (120)
• Pitch (0.031" / 0.80mm)
• Number of rows (2)
• Mounting type (Surface Mount)
• Contact finish and thickness (Gold, 10.0µin)
• Height above board (0.128" / 3.25mm)
• Mated stacking heights (5mm through 25mm)
• Features (Board Guide, Ground Bus)
• Compliance certifications (ROHS3, REACH Unaffected)

Parameter Comparison

Engineering Selection Recommendations

Both the QSE-060-01-L-D-A-TR and QSE-060-01-L-D-A are active production parts from Samtec Inc. with identical electrical and mechanical specifications. The parts differ only in packaging format: Cut Tape versus Tray. Selection between these parts should be based on manufacturing process requirements and inventory management practices.

The QSE-060-01-L-D-A-TR in Cut Tape packaging is suitable for automated pick-and-place assembly operations utilizing tape-fed component feeders. The QSE-060-01-L-D-A in Tray packaging accommodates manual handling, bulk storage, or alternative feeder systems. Both parts maintain full ROHS3 compliance and REACH unaffected status, ensuring regulatory compliance across applications.

Frequently Asked Questions (FAQ)

Q: Can QSE-060-01-L-D-A be used as a direct replacement for QSE-060-01-L-D-A-TR?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Tray versus Cut Tape). Direct substitution is valid for applications where the packaging format does not constrain assembly processes.

Q: What is the significance of the packaging difference between Cut Tape and Tray?

A: Cut Tape packaging is optimized for automated assembly lines using tape-fed component feeders. Tray packaging is used for manual assembly, bulk storage, or systems with different feeder configurations. The connector itself is identical in both formats.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and MSL rating of 1 (Unlimited). Regulatory and environmental certifications are equivalent.

Q: What mating stacking heights are available for these connectors?

A: Both parts support mated stacking heights of 5mm, 8mm, 11mm, 14mm, 16mm, 19mm, and 25mm, providing flexibility for applications with varying interconnection depth requirements.

Q: Is the contact finish specification identical between both parts?

A: Yes. Both parts feature gold contact finish with a thickness of 10.0µin (0.25µm), ensuring equivalent electrical performance and corrosion resistance.