Q6012NH2TP Equivalent & Substitute Parts

Part Overview

The Q6012NH2TP is an Alternistor-class snubberless TRIAC manufactured by Littelfuse Inc., rated for 600 V off-state voltage and 12 A on-state current in a surface mount TO-263AB package. This component is designed for AC switching applications requiring gate-controlled bidirectional thyristor functionality. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent substitute parts are identified when electrical parameters and mechanical packaging remain within specified tolerances for direct circuit board replacement.

Key Parameters

Parameter	Value	Unit
Voltage - Off State	600	V
Current - On State (It (RMS)) (Max)	12	A
Voltage - Gate Trigger (Vgt) (Max)	1.3	V
Current - Gate Trigger (Igt) (Max)	10	mA
Current - Hold (Ih) (Max)	15	mA
Operating Temperature Range	-40 to 125	°C (TJ)
Package / Case	TO-263-3, D2PAK	Surface Mount
Triac Type	Alternistor - Snubberless	—

Substitute Part Grouping Explanation

Substitution of the Q6012NH2TP is determined by equivalence across the following critical parameters:

Off-state voltage rating: 600 V minimum
On-state RMS current rating: 12 A minimum
Gate trigger voltage (Vgt): 1.3 V maximum
Gate trigger current (Igt): 10 mA maximum
Hold current (Ih): 15 mA maximum
Operating temperature range: -40°C to 125°C minimum
Package type: TO-263-3 / D2PAK surface mount configuration
Triac classification: Alternistor - Snubberless topology
Compliance: RoHS3, REACH Unaffected, MSL 1

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes for circuit board replacement without design modification.

Parameter Comparison

Parameter	Q6012NH2TP (Littelfuse)	T1210-6G (STMicroelectronics)	Match Status
Voltage - Off State	600 V	600 V	Equivalent
Current - On State (It (RMS)) (Max)	12 A	12 A	Equivalent
Voltage - Gate Trigger (Vgt) (Max)	1.3 V	1.3 V	Equivalent
Current - Gate Trigger (Igt) (Max)	10 mA	10 mA	Equivalent
Current - Hold (Ih) (Max)	15 mA	15 mA	Equivalent
Operating Temperature Range	-40 to 125°C	-40 to 125°C	Equivalent
Package / Case	TO-263-3, D2PAK	TO-263-3, D2PAK	Equivalent
Triac Type	Alternistor - Snubberless	Alternistor - Snubberless	Equivalent
Current - Non Rep. Surge 50, 60Hz (Itsm)	110A, 120A	120A, 126A	Compatible
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Equivalent
REACH Status	REACH Unaffected	REACH Unaffected	Equivalent

Engineering Selection Recommendations

The T1210-6G (STMicroelectronics) qualifies as a direct parametric equivalent to the Q6012NH2TP based on matching electrical specifications across all critical switching parameters and identical surface mount packaging. Both components maintain Active product status with full RoHS3 compliance and unlimited moisture sensitivity classification, ensuring regulatory and environmental compatibility in production environments.

The non-repetitive surge current ratings (Itsm) show minor variation, with the T1210-6G providing slightly higher surge capability (120A/126A vs. 110A/120A). This represents an enhancement rather than a limitation for circuit protection applications.

Selection between these parts is determined by availability, lead time, and supply chain requirements rather than electrical performance differences.

Frequently Asked Questions (FAQ)

Q: Can the T1210-6G replace the Q6012NH2TP in existing designs?

A: Yes. The T1210-6G meets all electrical parameter requirements and uses identical TO-263-3 / D2PAK surface mount packaging. No circuit design modifications are required for direct substitution.

Q: Are there differences in gate trigger characteristics?

A: No. Both parts specify identical maximum gate trigger voltage (Vgt) of 1.3 V and gate trigger current (Igt) of 10 mA, ensuring equivalent gate drive circuit compatibility.

Q: How do the surge current ratings compare?

A: The T1210-6G provides marginally higher non-repetitive surge current ratings (120A/126A at 50/60Hz) compared to the Q6012NH2TP (110A/120A). Both ratings exceed typical application requirements for 12 A RMS-rated devices.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the Q6012NH2TP and T1210-6G carry full RoHS3 compliance certification with REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the operating temperature range for both parts?

A: Both components operate across -40°C to 125°C junction temperature range, supporting industrial and commercial temperature environments without derating.

Q: Are there any package differences between these parts?

A: No. Both parts use identical TO-263-3 / D2PAK surface mount packaging with 2 leads plus tab configuration, ensuring PCB footprint and thermal management compatibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message