Equivalent & Substitute Parts for Q6010R5TP

Part Overview

The Q6010R5TP is a standard TRIAC manufactured by Littelfuse Inc., rated for 600V off-state voltage and 10A on-state current in a TO-220AB package. This component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, manufacturing discontinuation, or application-specific requirements within the same voltage and current rating class.

Key Parameters

Parameter	Q6010R5TP
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	10 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V
Current - Gate Trigger (Igt) (Max)	50 mA
Current - Hold (Ih) (Max)	50 mA
Operating Temperature Range	-40°C ~ 125°C (TJ)
Package / Case	TO-220-3
Mounting Type	Through Hole
Triac Type	Standard
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the Q6010R5TP are categorized based on the following electrical and mechanical parameters:

Primary Substitution Criteria:

Voltage - Off State: 600 V (mandatory match)
Package / Case: TO-220-3 (mandatory match)
Mounting Type: Through Hole (mandatory match)
Configuration: Single (mandatory match)
Gate Trigger Voltage (Vgt) (Max): ≤ 1.5 V (allowable tolerance)
Gate Trigger Current (Igt) (Max): ≤ 50 mA (allowable tolerance)
Current - Hold (Ih) (Max): ≤ 60 mA (allowable tolerance)

Current Rating Categories:

Direct Equivalent: 10 A on-state current (BTA10-600BRG)
Higher Current Capacity: 12 A or 16 A on-state current (BTA12-600BRG, BTB12-600BRG, BTB12-600BWRG, BTA316-600B,127, BTA316-600BT,127)

Parts with higher current ratings are suitable for applications where the Q6010R5TP is specified, as they provide additional thermal margin and surge capability while maintaining identical voltage and package specifications.

Parameter Comparison

Parameter	Q6010R5TP	BTA10-600BRG	BTA12-600BRG	BTB12-600BRG	BTB12-600BWRG	BTA316-600B,127	BTA316-600BT,127
Manufacturer	Littelfuse Inc.	STMicroelectronics	STMicroelectronics	STMicroelectronics	STMicroelectronics	WeEn Semiconductors	WeEn Semiconductors
Voltage - Off State	600 V	600 V	600 V	600 V	600 V	600 V	600 V
Current - On State (It (RMS)) (Max)	10 A	10 A	12 A	12 A	12 A	16 A	16 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V	1.3 V	1.3 V	1.3 V	1.3 V	1.5 V	1.5 V
Current - Gate Trigger (Igt) (Max)	50 mA	50 mA	50 mA	50 mA	50 mA	50 mA	50 mA
Current - Hold (Ih) (Max)	50 mA	50 mA	50 mA	50 mA	50 mA	60 mA	60 mA
Operating Temperature Range	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	-40°C ~ 125°C	125°C	-40°C ~ 150°C
Package / Case	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3	TO-220-3
Triac Type	Standard	Standard	Standard	Standard	Alternistor - Snubberless	Standard	Standard
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

BTA10-600BRG (Parametric Equivalent) This part provides exact electrical equivalence to the Q6010R5TP with identical on-state current rating of 10A. Manufactured by STMicroelectronics, it maintains all critical parameters including gate trigger voltage, hold current, and operating temperature range. RoHS3 compliance and Active product status ensure long-term availability and regulatory alignment.

BTA12-600BRG and BTB12-600BRG (Higher Current Capacity) Both parts offer 12A on-state current capacity with 600V voltage rating and TO-220-3 package compatibility. These components provide increased thermal margin and surge current capability (120A/126A) compared to the Q6010R5TP (100A/120A). Gate trigger parameters remain within acceptable tolerance. Both are manufactured by STMicroelectronics with ROHS3 compliance and Active status.

BTB12-600BWRG (Snubberless Variant) This STMicroelectronics part is classified as an Alternistor - Snubberless TRIAC with 12A rating. Electrical parameters match the standard 12A alternatives, with the distinction of snubberless operation. This variant is suitable for applications where snubber circuits are not required or where reduced component count is beneficial.

BTA316-600B,127 and BTA316-600BT,127 (Higher Current Capacity) Both WeEn Semiconductors parts provide 16A on-state current with 600V rating. Gate trigger voltage tolerance extends to 1.5V maximum, and hold current increases to 60mA maximum. The BTA316-600BT,127 variant supports extended operating temperature to 150°C. These parts deliver the highest current capacity and thermal performance within the 600V TO-220-3 package class.

Frequently Asked Questions (FAQ)

Q: Can BTA10-600BRG be used as a direct replacement for Q6010R5TP? A: Yes. The BTA10-600BRG is a parametric equivalent with identical on-state current (10A), voltage rating (600V), gate trigger voltage (1.3V maximum), and operating temperature range (-40°C to 125°C). Both use TO-220-3 packaging and through-hole mounting.

Q: What is the advantage of using BTA12-600BRG or BTB12-600BRG instead of BTA10-600BRG? A: The 12A variants provide higher on-state current capacity and increased non-repetitive surge current (120A/126A versus 100A/120A). These parts offer additional thermal margin in applications operating near the 10A limit of the Q6010R5TP.

Q: Are the BTA316 parts (16A) suitable for Q6010R5TP applications? A: Yes. The BTA316-600B,127 and BTA316-600BT,127 maintain 600V voltage rating and TO-220-3 package compatibility. The higher 16A current rating and increased surge capability (140A/150A) provide additional design margin. Gate trigger voltage tolerance extends to 1.5V, which remains within acceptable substitution parameters.

Q: What is the difference between BTB12-600BRG and BTB12-600BWRG? A: Both parts have identical electrical ratings (12A, 600V). The BTB12-600BWRG is classified as an Alternistor - Snubberless variant, designed for applications where snubber circuits are not required. The standard BTB12-600BRG is a conventional TRIAC.

Q: Does the BTA316-600BT,127 extended temperature range (-40°C to 150°C) affect substitution compatibility? A: No. The extended upper temperature limit of 150°C is a superset of the Q6010R5TP specification (-40°C to 125°C). This variant is suitable for applications requiring higher thermal performance or operation in elevated ambient conditions.

Q: Are all substitute parts RoHS compliant? A: Yes. All listed substitute parts are RoHS compliant (ROHS3 or RoHS Compliant status). The Q6010R5TP is ROHS3 compliant, and all alternatives meet or exceed this regulatory requirement.

Q: Can substitute parts with higher current ratings be used in circuits designed for 10A operation? A: Yes. Parts with higher current ratings (12A or 16A) are suitable for circuits designed for lower current operation. The higher rating provides additional thermal margin and does not degrade performance in lower-current applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message