Q6006L4 TRIAC 600V 6A TO-220AB Equivalent & Substitute Parts

Part Overview

The Q6006L4 is a standard TRIAC rated for 600V off-state voltage and 6A on-state current, manufactured by Littelfuse Inc. in a through-hole TO-220AB-3 package. This component is discontinued at DiGi Electronics, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value
Voltage - Off State	600 V
Current - On State (It (RMS)) (Max)	6 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V
Current - Gate Trigger (Igt) (Max)	25 mA
Current - Hold (Ih) (Max)	50 mA
Operating Temperature Range	-40°C to 125°C (TJ)
Mounting Type	Through Hole
Package / Case	TO-220-3
RoHS Status	RoHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the Q6006L4 is determined by the following critical parameters:

Voltage Rating: Off-state voltage must be 600V or higher to maintain electrical safety margins
Current Rating: On-state current (It) must meet or exceed 6A to handle the design load
Package Type: TO-220-3 through-hole configuration for mechanical compatibility
Gate Trigger Parameters: Vgt and Igt must be within acceptable ranges for gate drive circuit compatibility
Temperature Range: Operating temperature capability must support the application environment
Compliance: RoHS status ensures regulatory compliance for target markets

The BTA410Y-600BT,127 meets these substitution criteria with a 600V rating, higher current capacity (10A), compatible TO-220AB package, and active product status.

Parameter Comparison

Parameter	Q6006L4 (Main Part)	BTA410Y-600BT,127 (Substitute)
Manufacturer	Littelfuse Inc.	WeEn Semiconductors
Voltage - Off State	600 V	600 V
Current - On State (It (RMS)) (Max)	6 A	10 A
Voltage - Gate Trigger (Vgt) (Max)	1.3 V	1.5 V
Current - Gate Trigger (Igt) (Max)	25 mA	50 mA
Current - Hold (Ih) (Max)	50 mA	60 mA
Operating Temperature Range	-40°C to 125°C (TJ)	-40°C to 150°C (TJ)
Package / Case	TO-220-3	TO-220-3 Isolated Tab
Product Status	Discontinued at DiGi Electronics	Active
RoHS Status	RoHS3 Compliant	RoHS Compliant

Engineering Selection Recommendations

The BTA410Y-600BT,127 is a direct substitute for the Q6006L4 based on the following factors:

Voltage Equivalence: Both components are rated for 600V off-state operation, ensuring identical voltage class compatibility
Current Capability: The BTA410Y-600BT,127 provides 10A on-state current, exceeding the 6A requirement of the Q6006L4, offering design margin
Package Compatibility: Both use TO-220-3 through-hole packages with identical pin configurations and mounting footprints
Active Status: The BTA410Y-600BT,127 is an active product with current inventory availability, eliminating obsolescence risk
Compliance: Both components meet RoHS requirements for regulated markets
Temperature Performance: The BTA410Y-600BT,127 supports operation to 150°C, providing extended thermal margin over the Q6006L4's 125°C limit

Gate trigger parameters (Vgt, Igt) are slightly higher in the substitute but remain within acceptable ranges for standard gate drive circuits designed for 600V TRIACs.

Frequently Asked Questions (FAQ)

Q: Can the BTA410Y-600BT,127 be used as a direct replacement for the Q6006L4 without circuit modifications?

A: Yes. Both components share identical voltage ratings (600V), compatible TO-220-3 packages, and standard TRIAC gate trigger characteristics. The higher current rating (10A vs. 6A) and slightly elevated gate trigger parameters do not require circuit redesign for applications within the Q6006L4's original specifications.

Q: What is the significance of the "Isolated Tab" designation on the BTA410Y-600BT,127?

A: The isolated tab on the BTA410Y-600BT,127 provides electrical isolation between the tab and the main semiconductor junction, reducing thermal coupling to the mounting surface. This is a design improvement over standard tabs and does not affect mechanical compatibility or electrical performance in standard TO-220 mounting applications.

Q: Are there any gate drive circuit considerations when substituting to the BTA410Y-600BT,127?

A: The BTA410Y-600BT,127 has a maximum gate trigger voltage (Vgt) of 1.5V compared to the Q6006L4's 1.3V, and a maximum gate trigger current (Igt) of 50mA compared to 25mA. Standard gate drive circuits designed for 600V TRIACs accommodate these specifications without modification.

Q: What is the inventory status difference between these parts?

A: The Q6006L4 is discontinued at DiGi Electronics with 643 pieces listed as new original stock. The BTA410Y-600BT,127 is an active product with 1,093 pieces in current inventory, ensuring long-term availability for production and design support.

Q: Do both parts meet the same regulatory compliance standards?

A: Both components are RoHS compliant. The Q6006L4 carries RoHS3 certification, while the BTA410Y-600BT,127 carries RoHS certification. Both meet regulatory requirements for restricted substance control in target markets.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message