PXP6012/08P/CR Equivalent & Substitute Parts

Part Overview

The PXP6012/08P/CR is an 8-position circular connector receptacle housing manufactured by Bulgin as part of the Buccaneer® 6000 series. This panel mount connector is designed for male pins with crimp and solder cup contact options, offering IP66/IP68/IP69K ingress protection suitable for harsh environmental applications. The part is currently active in production with 917 units in stock. Substitute parts are identified when design requirements shift from panel mount to free hanging configurations or when alternative mounting solutions are necessary while maintaining electrical and mechanical compatibility.

Substiute Parts

PXP6012/08P/CR

BulginIn Stock: 1004PXP6012/08P/CR Datasheet

Current PartRFQ

PXP6011/08P/CR/0709

BulginIn Stock: 974PXP6011/08P/CR/0709 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PXP6012/08P/CR is determined by the following critical parameters that must remain constant:

• Series: Buccaneer® 6000
• Number of Positions: 8 (Power)
• Connector Type: Receptacle Housing
• Type: For Male Pins
• Contact Type: Crimp and Solder Cup
• Fastening Type: Push-Twist
• Orientation: Keyed
• Shell Material: Polycarbonate/Polybutylene Terephthalate (PBT), Halogen Free
• Housing Color: Gray
• Ingress Protection: IP66/IP68/IP69K
• Material Flammability Rating: UL94 V-0
• Operating Temperature: -40°C ~ 120°C
• Shielding: Unshielded
• RoHS Status: ROHS3 Compliant

The identified substitute part differs only in mounting configuration, transitioning from panel mount (bulkhead rear side nut) to free hanging (in-line) with backshell integration. This substitution is valid when application requirements change from fixed panel installations to cable-mounted or connector-to-connector configurations.

Parameter Comparison

Engineering Selection Recommendations

Both the PXP6012/08P/CR and PXP6011/08P/CR/0709 maintain active product status and full compliance with ROHS3 and REACH requirements. Selection between these parts is determined solely by mounting application requirements. The PXP6012/08P/CR is specified for panel mount installations requiring bulkhead rear side nut fastening. The PXP6011/08P/CR/0709 is specified for free hanging or in-line cable applications with integrated backshell. Both parts deliver identical electrical performance, environmental protection ratings, and thermal operating ranges within the Buccaneer® 6000 series architecture.

Frequently Asked Questions (FAQ)

Q: Can PXP6011/08P/CR/0709 replace PXP6012/08P/CR in a panel mount application?

A: No. The PXP6011/08P/CR/0709 is configured for free hanging (in-line) mounting with backshell integration. Panel mount applications require the PXP6012/08P/CR with bulkhead rear side nut fastening.

Q: Are the electrical contact specifications identical between these parts?

A: Yes. Both parts use 8-position crimp and solder cup contacts within the Buccaneer® 6000 series, maintaining identical electrical performance and keyed orientation.

Q: Do both parts meet the same environmental protection standards?

A: Yes. Both parts provide IP66/IP68/IP69K ingress protection and operate across the -40°C to 120°C temperature range with UL94 V-0 flammability rating.

Q: What is the primary difference between these substitute parts?

A: The mounting configuration differs. PXP6012/08P/CR uses panel mount with bulkhead fastening, while PXP6011/08P/CR/0709 uses free hanging in-line configuration with backshell.

Q: Are both parts RoHS3 compliant?

A: Yes. Both PXP6012/08P/CR and PXP6011/08P/CR/0709 are ROHS3 compliant with halogen-free PBT shell material.

Q: Can these parts be used interchangeably in cable assemblies?

A: Only the PXP6011/08P/CR/0709 is designed for cable assembly applications due to its free hanging in-line configuration. The PXP6012/08P/CR is restricted to panel mount installations.