PXP6011/03P/ST Equivalent & Substitute Parts

Part Overview

The PXP6011/03P/ST is a 3-position circular connector plug with male pins and screw termination, manufactured by Bulgin as part of the Buccaneer® 6000 series. This connector is rated for 16A at 277VAC/DC with IP66/IP68/IP69K ingress protection, making it suitable for industrial applications requiring dust-tight and waterproof performance. The product is currently obsolete, necessitating identification of active equivalent parts to maintain system compatibility and ensure continued availability for replacement and new installations.

Substiute Parts

PXP6011/03P/ST

BulginIn Stock: 1163PXP6011/03P/ST Datasheet

Current PartRFQ

PXP6011/03P/ST/0507

BulginIn Stock: 1020PXP6011/03P/ST/0507 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The PXP6011/03P/ST/0507 qualifies as a direct substitute based on the following critical parameters:

• Identical connector type (Plug, Male Pins) and position count (3 positions with 2 Power + PE configuration)
• Matching electrical ratings (16A current, 277VAC/DC voltage)
• Identical ingress protection class (IP66/IP68/IP69K)
• Identical operating temperature range (-40°C ~ 120°C)
• Identical termination method (Screw) and fastening type (Push-Twist)
• Identical shell material composition (Polycarbonate/Polybutylene Terephthalate, Halogen Free)
• Identical contact finish (Nickel)
• Identical compliance certifications (ROHS3 Compliant, REACH Unaffected)
• Same base product number (PXP6011) and series (Buccaneer® 6000)

The substitute part differs only in product status (Active vs. Obsolete), packaging (Bulk), and the addition of cable opening specification (0.197" ~ 0.276" / 5.00mm ~ 7.00mm), which represents a refinement rather than a functional change.

Parameter Comparison

Engineering Selection Recommendations

The PXP6011/03P/ST/0507 is the direct equivalent for the obsolete PXP6011/03P/ST. Selection of the active substitute part is based on:

• Identical electrical and mechanical specifications across all critical parameters
• Active product status ensuring ongoing availability and supply chain continuity
• Equivalent compliance certifications (ROHS3 Compliant, REACH Unaffected, EAR99 classification)
• Identical UL94 V-0 flammability rating and environmental protection class
• Same manufacturing series and base product number, confirming design continuity

The substitute part maintains full functional and physical compatibility with the obsolete model, with no performance degradation or application limitations.

Frequently Asked Questions (FAQ)

Q: Can PXP6011/03P/ST/0507 be used as a direct replacement for PXP6011/03P/ST?

A: Yes. Both parts share identical connector type, position count, electrical ratings (16A, 277VAC/DC), ingress protection (IP66/IP68/IP69K), operating temperature range (-40°C ~ 120°C), termination method (Screw), shell material (Halogen-Free PBT), and compliance certifications. The substitute is an active product, whereas the original is obsolete.

Q: What is the difference between these two part numbers?

A: The primary difference is product status: PXP6011/03P/ST is obsolete, while PXP6011/03P/ST/0507 is active. The substitute includes a specified cable opening range (0.197" ~ 0.276" / 5.00mm ~ 7.00mm) and is supplied in bulk packaging. All functional and electrical parameters remain identical.

Q: Are there any compatibility concerns when switching from PXP6011/03P/ST to PXP6011/03P/ST/0507?

A: No compatibility concerns exist. Both parts are from the same Buccaneer® 6000 series with identical mechanical interfaces, pin configurations, and electrical characteristics. The keyed orientation ensures correct mating alignment in both cases.

Q: What certifications apply to the substitute part?

A: The PXP6011/03P/ST/0507 is ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes. It carries a UL94 V-0 flammability rating and meets IP66/IP68/IP69K ingress protection standards.

Q: Is the cable opening specification critical for substitution?

A: The cable opening range (5.00mm ~ 7.00mm) specified for the substitute part defines the acceptable cable diameter for proper connector assembly. This is a mechanical specification that should be verified against your cable gauge to ensure proper fit and sealing performance.