PXM6011/02S/ST Equivalent & Substitute Parts

Part Overview

The PXM6011/02S/ST is a 2-position circular connector plug with female sockets manufactured by Bulgin as part of the Buccaneer® 6000 series. This component features screw termination, nickel-plated brass construction, and IP66/IP68/IP69K ingress protection suitable for industrial applications requiring dust-tight and waterproof connectivity. The part is currently classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for existing designs and maintenance applications.

Substiute Parts

PXM6011/02S/ST

BulginIn Stock: 867PXM6011/02S/ST Datasheet

Current PartRFQ

PXM6011/02S/ST/0507/SN

BulginIn Stock: 821PXM6011/02S/ST/0507/SN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PXM6011/02S/ST is determined by strict equivalence across the following critical parameters:

Connector classification parameters: Plug configuration with female sockets, 2-position power connector, Buccaneer® 6000 series, keyed orientation, and push-twist fastening type.

Electrical parameters: 16A current rating and 277VAC/DC voltage rating.

Environmental parameters: IP66/IP68/IP69K ingress protection and -40°C to 120°C operating temperature range.

Material and construction parameters: Brass shell and contacts with nickel plating on both shell and mating surfaces.

Termination parameters: Screw termination method.

Regulatory parameters: ROHS3 compliance and REACH unaffected status.

The substitute part PXM6011/02S/ST/0507/SN maintains all critical electrical, mechanical, and environmental specifications while transitioning from obsolete to active product status. The primary distinction is the addition of shielding and specified cable opening dimensions (0.197" ~ 0.276" / 5.00mm ~ 7.00mm), which represent functional enhancements rather than incompatibilities.

Parameter Comparison

Engineering Selection Recommendations

The PXM6011/02S/ST/0507/SN is the direct active equivalent for the obsolete PXM6011/02S/ST. Both components maintain identical electrical ratings (16A, 277VAC/DC), environmental protection (IP66/IP68/IP69K), and operating temperature specifications (-40°C ~ 120°C). Both are ROHS3 compliant and REACH unaffected, satisfying current regulatory requirements.

The substitute part incorporates shielding, which provides enhanced electromagnetic interference protection without compromising mechanical or electrical compatibility. The specified cable opening dimensions (5.00mm ~ 7.00mm) ensure proper strain relief and cable retention for standard industrial cable gauges.

Selection of the active substitute part ensures continued supply availability, compliance with current manufacturing standards, and access to current inventory levels (733 pieces in stock versus 764 pieces for the obsolete variant).

Frequently Asked Questions (FAQ)

Q: Can PXM6011/02S/ST/0507/SN be used as a direct replacement for PXM6011/02S/ST?

A: Yes. Both components share identical connector type, position count, electrical ratings, environmental protection class, operating temperature range, and termination method. The substitute part is the active production equivalent.

Q: What is the difference between the shielded and unshielded versions?

A: The main part (PXM6011/02S/ST) is unshielded. The substitute (PXM6011/02S/ST/0507/SN) includes shielding for electromagnetic interference mitigation. Shielding does not affect mechanical fit or electrical performance in standard applications.

Q: Are the cable opening specifications critical for compatibility?

A: The substitute part specifies cable opening dimensions of 5.00mm ~ 7.00mm. This defines the acceptable cable diameter range for proper strain relief and retention. Verify your cable diameter falls within this range during installation.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the main part and substitute are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance regulations.

Q: What is the inventory status difference?

A: The obsolete main part has 764 pieces in stock. The active substitute has 733 pieces in stock. The substitute represents the current production line and ensures long-term availability.

Q: Are there any mechanical dimension differences?

A: Both components share the same Buccaneer® 6000 series form factor, keyed orientation, and free-hanging in-line mounting configuration. No mechanical redesign is required for substitution.