PXM6010/22P/CR Equivalent & Substitute Parts

Part Overview

The PXM6010/22P/CR is a 22-position circular connector plug housing manufactured by Bulgin as part of the Buccaneer® 6000 series. This free-hanging, in-line connector features a push-twist fastening mechanism, nickel-plated brass shell, and IP66/IP68/IP69K ingress protection rating. The part is classified as obsolete, making identification of active equivalent alternatives essential for ongoing system maintenance and new design implementations.

Substiute Parts

PXM6010/22P/CR

BulginIn Stock: 1039PXM6010/22P/CR Datasheet

Current PartRFQ

PXM6010/22P/CR/0910/SN

BulginIn Stock: 929PXM6010/22P/CR/0910/SN Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The PXM6010/22P/CR has one manufacturer-recommended substitute: PXM6010/22P/CR/0910/SN. This substitution is valid based on the following matching parameters:

• Same manufacturer (Bulgin)
• Same series (Buccaneer® 6000)
• Identical number of positions (22 Power)
• Identical connector type (Plug Housing for Male Pins)
• Identical mounting configuration (Free Hanging In-Line)
• Identical fastening mechanism (Push-Twist)
• Identical shell material and finish (Nickel-plated Brass)
• Identical ingress protection rating (IP66/IP68/IP69K)
• Identical operating temperature range (-40°C ~ 120°C)
• Identical contact type (Crimp and Solder Cup)
• Identical orientation (Keyed)
• Identical RoHS compliance (ROHS3 Compliant)

The substitute part differs in product status (Active vs. Obsolete) and packaging configuration (Bulk vs. standard), making it the direct functional equivalent for replacement applications.

Parameter Comparison

Engineering Selection Recommendations

The PXM6010/22P/CR/0910/SN is the manufacturer-recommended substitute for the obsolete PXM6010/22P/CR. Selection of the substitute part is based on:

• Active product status ensuring continued availability and manufacturing support
• Full compliance with ROHS3 and REACH regulations
• Identical electrical and mechanical specifications across all critical parameters
• Maintained ingress protection rating for sealed applications
• Consistent operating temperature performance across the specified range

The substitute part maintains functional equivalence for all applications where the original part was specified.

Frequently Asked Questions (FAQ)

Q: Can PXM6010/22P/CR/0910/SN be used as a direct replacement for PXM6010/22P/CR?

A: Yes. The substitute part is manufacturer-recommended and maintains identical specifications for connector type, position count, mounting configuration, fastening mechanism, shell material, ingress protection rating, and operating temperature range.

Q: What is the difference between the original and substitute part numbers?

A: The primary difference is product status. The original PXM6010/22P/CR is obsolete, while PXM6010/22P/CR/0910/SN is active. The suffix "/0910/SN" indicates packaging and manufacturing date code information. Both parts are functionally equivalent.

Q: Are there any compatibility concerns when substituting these parts?

A: No compatibility concerns exist. Both parts are keyed 22-position plug housings with identical push-twist fastening, nickel-plated brass construction, and IP66/IP68/IP69K protection. Pin and socket contacts remain interchangeable between the two part numbers.

Q: What is the inventory status of these parts?

A: PXM6010/22P/CR has 999 pieces in stock (obsolete status). PXM6010/22P/CR/0910/SN has 828 pieces in stock (active status). For new designs and ongoing procurement, the active substitute part is recommended.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with identical HTSUS code 8538.90.8180.