PVT212S-T Equivalent & Substitute Parts

Part Overview

The PVT212S-T is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) device. This component is designed for switching applications requiring 550 mA load current at 0–150 V AC/DC output with a 1.2 VDC input signal. The device is packaged in a 6-SMD surface-mount configuration with gull wing termination.

The PVT212S-T carries an obsolete product status, making it necessary to identify functionally equivalent alternatives for new designs and ongoing production requirements. Direct manufacturer substitutes are available that maintain identical electrical and mechanical specifications while offering improved compliance and availability.

Substiute Parts

PVT212S-T

Infineon TechnologiesIn Stock: 745PVT212S-T Datasheet

Current PartRFQ

PVT212S-TPBF

Infineon TechnologiesIn Stock: 1652PVT212S-TPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVT212S-T is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: SPST-NO (1 Form A) topology must be maintained
• Electrical Ratings: Input voltage (1.2 VDC), load voltage range (0–150 V AC/DC), and load current (550 mA) must be identical
• On-State Resistance: Maximum 750 mOhms specification must be met or exceeded
• Package and Termination: 6-SMD (0.300", 7.62mm) with gull wing termination ensures PCB compatibility
• Mounting Type: Surface mount configuration must be preserved

The PVT212S-TPBF is a direct manufacturer equivalent that satisfies all substitution criteria. Both parts share the same base product number (PVT212) and are manufactured by Infineon Technologies within the PVT HEXFET® series.

Parameter Comparison

Engineering Selection Recommendations

The PVT212S-TPBF is the direct substitute for the obsolete PVT212S-T. Both components are electrically and mechanically identical across all functional parameters. The PVT212S-TPBF offers the following advantages:

• Active Product Status: Ensures long-term availability and supply chain continuity
• RoHS3 Compliance: Meets current environmental and regulatory requirements, whereas the PVT212S-T is RoHS non-compliant
• Moisture Sensitivity: MSL 4 (72 Hours) specification provides standard handling requirements for modern manufacturing environments

For applications currently using the PVT212S-T, direct replacement with PVT212S-TPBF is supported without circuit modification or re-qualification, provided that moisture sensitivity handling procedures are implemented during assembly.

Frequently Asked Questions (FAQ)

Q: Can PVT212S-TPBF be used as a direct drop-in replacement for PVT212S-T?

A: Yes. Both parts are electrically and mechanically identical. The PVT212S-TPBF maintains the same 1.2 VDC input, 0–150 V load voltage range, 550 mA load current, 750 mOhms on-state resistance, and 6-SMD gull wing package. No circuit changes are required.

Q: What is the difference between PVT212S-T and PVT212S-TPBF?

A: The primary differences are product status, RoHS compliance, and moisture sensitivity level. The PVT212S-T is obsolete and RoHS non-compliant with MSL 1. The PVT212S-TPBF is active, ROHS3 compliant, and has MSL 4 (72 Hours).

Q: Are there any handling differences when switching to PVT212S-TPBF?

A: The PVT212S-TPBF has MSL 4 (72 Hours) versus MSL 1 (Unlimited) for the PVT212S-T. This requires standard moisture sensitivity handling procedures during storage and assembly, including baking if the component is exposed to humidity above specified limits.

Q: Will PVT212S-TPBF work in existing PCB designs without modification?

A: Yes. The package, termination style, and pin configuration are identical. PCB layouts designed for PVT212S-T require no changes for PVT212S-TPBF integration.

Q: Is PVT212S-TPBF suitable for new product designs?

A: Yes. As an active product with RoHS3 compliance and REACH unaffected status, PVT212S-TPBF is appropriate for new designs and meets current regulatory requirements.