PVT212PBF Equivalent & Substitute Parts

Part Overview

The PVT212PBF is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a single-pole single-throw normally open (SPST-NO) switch. This component operates with a 1.2VDC input signal and supports load voltages from 0V to 150V with a maximum load current of 550mA. The device is packaged in a 6-DIP through-hole configuration with a maximum on-state resistance of 750mOhms.

The PVT212PBF is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades.

Substiute Parts

PVT212PBF

Infineon TechnologiesIn Stock: 127786PVT212PBF Datasheet

Current PartRFQ

PVT212S-TPBF

Infineon TechnologiesIn Stock: 1652PVT212S-TPBF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVT212PBF is determined by strict equivalence across the following electrical and mechanical parameters:

• Circuit Configuration: Must be SPST-NO (1 Form A)
• Input Voltage: Must be 1.2VDC
• Load Voltage Range: Must support 0V ~ 150V
• Load Current: Must support 550mA maximum
• On-State Resistance: Must not exceed 750mOhms
• Output Type: Must support both AC and DC loads
• Base Product Number: Must be PVT212 (same device family)
• Manufacturer: Infineon Technologies

The PVT212S-TPBF qualifies as a manufacturer-recommended substitute because it maintains identical electrical specifications while differing only in mounting technology (surface mount versus through-hole) and packaging format (tape & reel versus tube).

Parameter Comparison

Engineering Selection Recommendations

The PVT212S-TPBF is the manufacturer-recommended substitute for the obsolete PVT212PBF. Both components are manufactured by Infineon Technologies and maintain identical electrical performance specifications across all critical parameters: input voltage, load voltage range, load current capacity, and on-state resistance.

The primary difference between these parts is the mounting technology and packaging format. The PVT212PBF uses through-hole mounting with PC pins, while the PVT212S-TPBF uses surface-mount technology with gull-wing termination. This distinction requires PCB redesign if transitioning from through-hole to surface-mount assembly.

Both parts are ROHS3 compliant and carry the same REACH and ECCN classifications. The PVT212S-TPBF is currently in active production status, ensuring long-term availability and supply chain stability compared to the obsolete PVT212PBF.

Frequently Asked Questions (FAQ)

Q: Can the PVT212S-TPBF be used as a direct pin-for-pin replacement for the PVT212PBF?

A: No. The PVT212S-TPBF uses surface-mount gull-wing termination, while the PVT212PBF uses through-hole PC pins. Direct substitution requires PCB redesign and assembly process changes. However, the electrical performance is identical.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is determined by matching: circuit configuration (SPST-NO), input voltage (1.2VDC), load voltage range (0V ~ 150V), load current (550mA), on-state resistance (750mOhms maximum), and output type (AC/DC). All these parameters are identical between the PVT212PBF and PVT212S-TPBF.

Q: Why is the PVT212PBF classified as obsolete?

A: The PVT212PBF is no longer in active production. The PVT212S-TPBF represents the current production equivalent, reflecting the industry shift toward surface-mount technology.

Q: Are there differences in moisture sensitivity between these parts?

A: Yes. The PVT212PBF has MSL 1 (unlimited moisture exposure tolerance), while the PVT212S-TPBF has MSL 4 (72-hour exposure limit). The PVT212S-TPBF requires controlled storage and handling conditions prior to soldering.

Q: What packaging formats are available for each part?

A: The PVT212PBF is supplied in tube packaging for through-hole assembly. The PVT212S-TPBF is supplied in tape & reel format for automated surface-mount assembly.