PVN013S-TPBF Equivalent & Substitute Parts

Part Overview

The PVN013S-TPBF is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switching device. This component operates with a 1.2VDC input signal and supports load voltages from 0V to 20V at a maximum current of 2.5A, with an on-state resistance of 100 mOhms maximum. The device is packaged in a 6-SMD surface mount configuration with gull wing termination.

The PVN013S-TPBF carries an obsolete product status. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production, repair, and long-term system support.

Substiute Parts

PVN013S-TPBF

Infineon TechnologiesIn Stock: 3502PVN013S-TPBF Datasheet

Current PartRFQ

PVN012S-TPBF

Infineon TechnologiesIn Stock: 6081PVN012S-TPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVN013S-TPBF is determined by strict equivalence across the following critical parameters:

• Circuit configuration: SPST-NO (1 Form A)
• Input voltage: 1.2VDC
• Load voltage range: 0V to 20V
• Load current rating: 2.5A
• On-state resistance: 100 mOhms maximum
• Output type: AC and DC capability
• Package type: 6-SMD (0.300", 7.62mm) with gull wing termination
• Mounting technology: Surface mount
• Compliance standards: ROHS3, REACH Unaffected

The PVN012S-TPBF meets all these criteria and is classified as a direct substitute for the obsolete PVN013S-TPBF.

Parameter Comparison

Engineering Selection Recommendations

The PVN012S-TPBF is the direct substitute for the obsolete PVN013S-TPBF. Both components are manufactured by Infineon Technologies within the same PVN HEXFET® series and share identical electrical and mechanical specifications.

The primary distinction is product status: PVN013S-TPBF is obsolete, while PVN012S-TPBF maintains active production status. This ensures long-term component availability and supply chain continuity.

Both parts maintain equivalent compliance certifications: ROHS3 compliance and REACH Unaffected status. Moisture sensitivity levels are identical at MSL 4 (72 Hours), requiring equivalent handling and storage protocols.

For new designs, repair operations, and production continuity, the PVN012S-TPBF is the appropriate selection.

Frequently Asked Questions (FAQ)

Q: Can PVN012S-TPBF be used as a direct replacement for PVN013S-TPBF in existing designs?

A: Yes. The PVN012S-TPBF is electrically and mechanically identical to the PVN013S-TPBF. All electrical parameters, load ratings, input voltage, output voltage range, on-state resistance, and package dimensions are equivalent. No circuit modifications are required.

Q: What is the primary reason for substitution?

A: The PVN013S-TPBF is obsolete. The PVN012S-TPBF is the active production equivalent, ensuring component availability for current and future procurement.

Q: Are the package dimensions and termination styles identical?

A: Yes. Both components use the 6-SMD (0.300", 7.62mm) package with gull wing termination. PCB footprints and assembly processes are identical.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the PVN013S-TPBF and PVN012S-TPBF carry an MSL rating of 4 (72 Hours). Identical moisture control and storage conditions apply.

Q: Are compliance certifications equivalent?

A: Yes. Both parts are ROHS3 compliant and REACH Unaffected. Regulatory and environmental compliance requirements are met by either component.

Q: What is the load current capacity?

A: Both components support a maximum load current of 2.5A across the 0V to 20V load voltage range.

Q: Can these relays switch both AC and DC loads?

A: Yes. Both the PVN013S-TPBF and PVN012S-TPBF are rated for AC and DC output operation.