PVN013SPBF Equivalent & Substitute Parts

Part Overview

The PVN013SPBF is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switching device. This component operates with a 1.2VDC input signal and supports AC/DC loads up to 2.5A at 0-20V output voltage range. The device is packaged in a 6-SMD surface mount configuration with gull wing termination.

The PVN013SPBF carries an obsolete product status. Identifying functionally equivalent alternatives is necessary to ensure design continuity and maintain supply chain reliability for applications currently utilizing this component.

Substiute Parts

PVN013SPBF

Infineon TechnologiesIn Stock: 2235PVN013SPBF Datasheet

Current PartRFQ

PVN012SPBF

Infineon TechnologiesIn Stock: 2260PVN012SPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVN013SPBF is determined by strict equivalence across the following critical parameters:

• Circuit configuration: SPST-NO (1 Form A)
• Input voltage: 1.2VDC
• Load voltage range: 0V - 20V
• Load current rating: 2.5A
• On-state resistance: 100 mOhms maximum
• Output type: AC, DC capable
• Package type: 6-SMD (0.300", 7.62mm)
• Termination style: Gull Wing
• Mounting type: Surface Mount

The PVN012SPBF meets all substitution criteria. Both components share identical electrical specifications, mechanical packaging, and environmental compliance ratings. The primary distinction is product status: PVN012SPBF maintains active production status, whereas PVN013SPBF is obsolete.

Parameter Comparison

Engineering Selection Recommendations

The PVN012SPBF is the direct functional equivalent for the obsolete PVN013SPBF. Both components are manufactured by Infineon Technologies within the same PVN HEXFET® series and maintain identical electrical and mechanical specifications.

Selection of PVN012SPBF over PVN013SPBF is supported by:

• Active product status ensuring continued availability and manufacturing support
• ROHS3 compliance matching the original component
• Identical MSL rating (4, 72 Hours) for moisture sensitivity handling
• Full electrical parameter equivalence across input voltage, load voltage range, load current, and on-state resistance
• Identical package configuration and termination style, enabling direct PCB layout compatibility

No design modifications are required when transitioning from PVN013SPBF to PVN012SPBF.

Frequently Asked Questions (FAQ)

Q: Can PVN012SPBF be used as a direct replacement for PVN013SPBF in existing designs?

A: Yes. The PVN012SPBF is electrically and mechanically identical to PVN013SPBF. No circuit modifications or PCB layout changes are necessary. Both components share the same input voltage (1.2VDC), load voltage range (0-20V), load current rating (2.5A), on-state resistance (100 mOhms), and 6-SMD package configuration.

Q: What is the primary reason to substitute PVN013SPBF?

A: PVN013SPBF is classified as obsolete. PVN012SPBF maintains active production status, ensuring reliable long-term supply and manufacturing support.

Q: Are there any compliance or certification differences between these parts?

A: No. Both components carry ROHS3 compliance, identical MSL ratings (4, 72 Hours), and equivalent REACH and ECCN classifications.

Q: Will the packaging or termination style affect PCB assembly?

A: No. Both components use identical 6-SMD (0.300", 7.62mm) packaging with gull wing termination. Assembly processes and solder reflow profiles remain unchanged.

Q: Are there inventory or lead time considerations?

A: PVN012SPBF is actively manufactured and stocked. PVN013SPBF, being obsolete, may have limited remaining inventory. Transition to PVN012SPBF is recommended to avoid supply chain disruption.