PVM-10V680ME60E-R2 Equivalent & Substitute Parts

Part Overview

The PVM-10V680ME60E-R2 is a 68 µF, 10 V aluminum polymer capacitor manufactured by Elna America. This surface mount component is designed for general purpose applications requiring stable capacitance and low equivalent series resistance in compact form factors. The part is currently in active production status with 1846 units available in inventory. Substitute parts are identified when equivalent electrical and mechanical specifications are required due to supply constraints, procurement lead times, or design flexibility needs.

Substiute Parts

PVM-10V680ME60E-R2

Elna AmericaIn Stock: 1944PVM-10V680ME60E-R2 Datasheet

Current PartRFQ

PCJ1A680MCL1GS

NichiconIn Stock: 3738PCJ1A680MCL1GS Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PVM-10V680ME60E-R2 are qualified based on strict electrical and mechanical parameter matching. The following criteria determine substitution eligibility:

Electrical Parameters (Must Match Exactly):

• Capacitance: 68 µF
• Voltage Rating: 10 V
• Tolerance: ±20%
• Type: Polymer
• ESR: 28 mOhm
• Lifetime: 2000 Hrs @ 105°C
• Operating Temperature Range: -55°C ~ 105°C
• Ripple Current @ 100 kHz: 2.31 A

Mechanical Parameters (Must Match Exactly):

• Size / Dimension: 0.197" Dia (5.00mm)
• Height - Seated (Max): 0.236" (6.00mm)
• Surface Mount Land Size: 0.209" L x 0.209" W (5.30mm x 5.30mm)
• Mounting Type: Surface Mount
• Package / Case: Radial, Can - SMD

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The PCJ1A680MCL1GS manufactured by Nichicon is a parametric equivalent to the PVM-10V680ME60E-R2. All critical electrical and mechanical specifications are identical, including capacitance, voltage rating, tolerance, ESR, lifetime rating, operating temperature range, ripple current capability, and physical dimensions.

Both parts maintain ROHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, confirming suitability for standard surface mount assembly processes without special handling requirements.

The primary differences between these parts are:

Packaging Format: The main part is supplied in Cut Tape (CT) format, while the substitute is supplied in Tape & Reel (TR) format. This distinction affects procurement and automated assembly processes but does not impact electrical or mechanical performance.

REACH Status: The main part is REACH Unaffected, while the substitute is REACH Affected. Organizations subject to REACH regulations must evaluate compliance requirements based on their specific regulatory jurisdiction and supply chain obligations.

Both parts are in active production status with adequate inventory availability. Selection between these parts should be based on packaging requirements, regulatory compliance obligations, and procurement lead time considerations.

Frequently Asked Questions (FAQ)

Q: Can the PCJ1A680MCL1GS be used as a direct replacement for the PVM-10V680ME60E-R2 in surface mount assembly?

A: Yes. All electrical parameters (capacitance, voltage, tolerance, ESR, lifetime, temperature range, ripple current) and mechanical parameters (size, height, land size, mounting type, package style) are identical. Both parts are surface mount components with matching footprints and can be used interchangeably from an electrical and mechanical standpoint.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Cut Tape (CT) packaging supplies components on tape that has been cut into smaller sections, typically used for manual assembly or smaller production runs. Tape & Reel (TR) packaging supplies components on continuous tape wound on a reel, optimized for automated pick-and-place assembly equipment. The components themselves are identical; the difference is in the supply format and handling method.

Q: Are there any temperature or performance differences between these two parts?

A: No. Both parts have identical operating temperature ranges (-55°C ~ 105°C), identical lifetime ratings (2000 Hrs @ 105°C), and identical ripple current specifications (2.31 A @ 100 kHz). Performance characteristics are equivalent across all thermal and electrical operating conditions.

Q: What does REACH Affected versus REACH Unaffected mean?

A: REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) is a European Union regulation governing chemical substances. REACH Affected indicates the component may contain substances subject to REACH regulations, while REACH Unaffected indicates the component is not subject to these regulations. Organizations operating in or supplying to the EU must evaluate their specific compliance obligations.

Q: Do both parts require special moisture handling during assembly?

A: No. Both parts have Moisture Sensitivity Level (MSL) 1, which means Unlimited moisture sensitivity. These components do not require special moisture control or baking procedures prior to surface mount assembly, simplifying procurement and manufacturing processes.

Q: Are both parts RoHS compliant?

A: Yes. Both the PVM-10V680ME60E-R2 and PCJ1A680MCL1GS are ROHS3 compliant, confirming they meet Restriction of Hazardous Substances requirements for lead-free and restricted substance compliance.