PVG613S-TPBF Equivalent & Substitute Parts

Part Overview

The PVG613S-TPBF is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switch with 1A load current capacity and 0–60V output voltage range. This component operates with 1.2VDC input and features a 500 mOhms maximum on-state resistance in a 6-SMD surface mount package.

The PVG613S-TPBF is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Key Parameters

Parameter	Value
Manufacturer Part Number	PVG613S-TPBF
Manufacturer	Infineon Technologies
Circuit Configuration	SPST-NO (1 Form A)
Output Type	AC, DC
Voltage - Input	1.2VDC
Voltage - Load	0 V ~ 60 V
Load Current	1 A
On-State Resistance (Max)	500 mOhms
Package / Case	6-SMD (0.300", 7.62mm)
Mounting Type	Surface Mount
Termination Style	Gull Wing
Product Status	Obsolete
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	4 (72 Hours)

Substitute Part Grouping Explanation

Substitution of the PVG613S-TPBF is determined by the following critical parameters:

Circuit Configuration: SPST-NO (1 Form A) topology must be maintained
Load Current Capacity: Minimum 1A at rated conditions
Output Voltage Range: 0–60V DC/AC compatibility
Package / Case: 6-SMD (0.300", 7.62mm) with Gull Wing termination for PCB compatibility
Mounting Type: Surface mount technology
Input Voltage: 1.2–1.3VDC acceptable range
On-State Resistance: 500 mOhms or lower for equivalent thermal and switching performance

Substitute parts are grouped into two categories:

Direct Equivalent (Same Current Rating):

PVG612S-TPBF (Infineon Technologies, Active status)
ASSR-1511-301E and ASSR-1511-501E (Broadcom Limited, Active status)

Higher Current Capacity (Uprating Available):

ASSR-1411-301E and ASSR-1411-501E (600mA rating)
ASSR-1611-301E and ASSR-1611-501E (2.5A rating)

Lower Current Capacity (Downrating Available):

ASSR-1219-301E and ASSR-1219-501E (200mA rating)

Parameter Comparison

Parameter	PVG613S-TPBF	PVG612S-TPBF	ASSR-1511-301E	ASSR-1511-501E	ASSR-1411-301E	ASSR-1411-501E	ASSR-1611-301E	ASSR-1611-501E	ASSR-1219-301E	ASSR-1219-501E
Manufacturer	Infineon	Infineon	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active
Circuit Configuration	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO
Output Type	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC
Voltage - Input	1.2VDC	1.2VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC
Voltage - Load	0–60V	0–60V	0–60V	0–60V	0–60V	0–60V	0–60V	0–60V	0–60V	0–60V
Load Current	1 A	1 A	1 A	1 A	600 mA	600 mA	2.5 A	2.5 A	200 mA	200 mA
On-State Resistance (Max)	500 mOhms	500 mOhms	500 mOhms	500 mOhms	1 Ohm	1 Ohm	100 mOhms	100 mOhms	10 Ohms	10 Ohms
Package / Case	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Termination Style	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	4 (72 Hours)	4 (72 Hours)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Recommendation for Direct Replacement:

PVG612S-TPBF is the preferred direct substitute. It maintains identical electrical specifications (1A load current, 500 mOhms on-state resistance, 1.2VDC input) and package configuration. Both parts are ROHS3 compliant and share the same series designation (PVG, HEXFET®). The PVG612S-TPBF is in active production status with 9988 units in stock, ensuring long-term availability.

Secondary Recommendation for Direct Replacement:

ASSR-1511-301E and ASSR-1511-501E (Broadcom Limited) provide electrical equivalence with identical load current (1A) and on-state resistance (500 mOhms). These parts are active status with ROHS3 compliance and MSL 1 rating, indicating superior moisture handling compared to the original part. The primary difference is input voltage specification (1.3VDC vs. 1.2VDC), which is within acceptable tolerance for most applications. Packaging variants (Tube vs. Cut Tape & Digi-Reel®) accommodate different procurement workflows.

Uprating Options:

ASSR-1411-301E and ASSR-1411-501E support 600mA load current with 1 Ohm on-state resistance. These are suitable for applications requiring higher current margin or lower thermal dissipation.

ASSR-1611-301E and ASSR-1611-501E support 2.5A load current with 100 mOhms on-state resistance. These are suitable for applications requiring significant current headroom or minimal voltage drop.

Downrating Option:

ASSR-1219-301E and ASSR-1219-501E support 200mA load current with 10 Ohms on-state resistance. These are suitable only for applications with reduced current requirements and are not recommended as direct replacements for 1A-rated designs.

All substitute parts maintain SPST-NO circuit topology, 0–60V load voltage range, AC/DC output capability, 6-SMD package configuration, and Gull Wing termination. All are ROHS3 compliant and REACH unaffected.

Frequently Asked Questions (FAQ)

Q: Can PVG612S-TPBF directly replace PVG613S-TPBF without circuit modification?

A: Yes. PVG612S-TPBF is a direct electrical and mechanical equivalent. Both parts share identical load current (1A), on-state resistance (500 mOhms), input voltage (1.2VDC), output voltage range (0–60V), package (6-SMD), and termination style (Gull Wing). No circuit redesign is required.

Q: What is the difference between ASSR-1511-301E and ASSR-1511-501E?

A: Both parts are electrically identical with 1A load current and 500 mOhms on-state resistance. The difference is packaging: ASSR-1511-301E is supplied in Tube format, while ASSR-1511-501E is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on procurement and assembly requirements.

Q: Why do Broadcom ASSR parts specify 1.3VDC input instead of 1.2VDC?

A: The 1.3VDC specification represents the manufacturer's rated input voltage for the ASSR series. This 0.1VDC difference is within normal design tolerance and does not affect functional compatibility in applications designed for 1.2VDC input. Both voltage levels operate the relay within specified parameters.

Q: Can I use ASSR-1219-301E (200mA) as a substitute for PVG613S-TPBF (1A)?

A: No. ASSR-1219-301E has a maximum load current of 200mA, which is insufficient for applications requiring 1A switching capacity. Using an undersized component creates risk of relay failure and circuit malfunction. This part is suitable only for applications with reduced current requirements.

Q: Can I use ASSR-1611-501E (2.5A) as a substitute for PVG613S-TPBF (1A)?

A: Yes. ASSR-1611-501E can replace PVG613S-TPBF in applications requiring 1A or less. The higher current rating (2.5A) provides design margin and improved reliability. The lower on-state resistance (100 mOhms vs. 500 mOhms) reduces power dissipation. No circuit modification is required.

Q: What is the significance of MSL (Moisture Sensitivity Level) differences?

A: PVG613S-TPBF has MSL 4 (72 Hours), requiring controlled storage and handling. All Broadcom ASSR substitutes have MSL 1 (Unlimited), indicating superior moisture resistance and simplified storage requirements. MSL 1 parts are preferred for applications with extended shelf life or challenging environmental conditions.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. PVG613S-TPBF, PVG612S-TPBF, and all ASSR substitute parts are ROHS3 compliant. All parts are REACH unaffected. Compliance certifications are maintained across all equivalent and substitute options.

Q: What packaging options are available for the ASSR-1511 series?

A: ASSR-1511-301E is supplied in Tube packaging. ASSR-1511-501E is supplied in Cut Tape (CT) & Digi-Reel® packaging. Both maintain identical electrical specifications and 6-SMD package configuration. Selection is based on assembly line requirements and procurement preferences.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message