PVG613S-T Solid State Relay: Equivalent & Substitute Parts

Part Overview

The PVG613S-T is a Surface Mount Solid State Relay (SSR) manufactured by Infineon Technologies, configured as SPST-NO (1 Form A) with a 1A load current rating and 0-60V output voltage range. This component is classified as Obsolete, making substitute parts necessary for new designs and ongoing production requirements. The PVG613S-T operates with 1.2VDC input and features a 500 mOhms maximum on-state resistance in a 6-SMD (0.300", 7.62mm) gull wing package.

Substiute Parts

PVG613S-T

Infineon TechnologiesIn Stock: 875PVG613S-T Datasheet

Current PartRFQ

ASSR-1219-301E

Broadcom LimitedIn Stock: 5908ASSR-1219-301E Datasheet

MFR RecommendedRFQ

ASSR-1219-501E

Broadcom LimitedIn Stock: 6087ASSR-1219-501E Datasheet

MFR RecommendedRFQ

ASSR-1411-301E

Broadcom LimitedIn Stock: 1488ASSR-1411-301E Datasheet

MFR RecommendedRFQ

ASSR-1411-501E

Broadcom LimitedIn Stock: 17810ASSR-1411-501E Datasheet

MFR RecommendedRFQ

ASSR-1511-301E

Broadcom LimitedIn Stock: 1342ASSR-1511-301E Datasheet

MFR RecommendedRFQ

ASSR-1511-501E

Broadcom LimitedIn Stock: 4336ASSR-1511-501E Datasheet

MFR RecommendedRFQ

ASSR-1611-301E

Broadcom LimitedIn Stock: 1441ASSR-1611-301E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PVG613S-T is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

• Circuit Configuration: SPST-NO (1 Form A)
• Output Type: AC, DC
• Load Voltage Range: 0 V ~ 60 V
• Package / Case: 6-SMD (0.300", 7.62mm)
• Termination Style: Gull Wing
• Mounting Type: Surface Mount

Load Current Substitution Tiers: The PVG613S-T operates at 1A load current. Substitute parts are grouped by load current capability:

• Direct Equivalents (1A): ASSR-1511-301E, ASSR-1511-501E
• Higher Current Capability (600mA): ASSR-1411-301E, ASSR-1411-501E
• Lower Current Capability (200mA): ASSR-1219-301E, ASSR-1219-501E
• Higher Current Capability (2.5A): ASSR-1611-301E

All substitute parts are manufactured by Broadcom Limited and maintain identical package geometry and electrical interface specifications. Input voltage differs slightly (1.3VDC vs. 1.2VDC), which is within standard design tolerance for SSR control circuits.

Parameter Comparison

Engineering Selection Recommendations

Direct Replacement (Recommended for 1A Applications): ASSR-1511-301E and ASSR-1511-501E are direct functional equivalents to the PVG613S-T. Both maintain identical load current (1A), on-state resistance (500 mOhms), and electrical interface specifications. Both parts are Active status with ROHS3 compliance and MSL 1 rating, providing superior reliability and supply chain availability compared to the obsolete PVG613S-T.

Higher Current Capability Options: ASSR-1611-301E provides 2.5A load current capability with reduced on-state resistance (100 mOhms), suitable for applications requiring additional current margin or lower power dissipation. ASSR-1411-301E and ASSR-1411-501E offer 600mA capability with 1 Ohms on-state resistance for moderate current applications.

Lower Current Capability Options: ASSR-1219-301E and ASSR-1219-501E are suitable only for applications with maximum load current of 200mA, as they do not meet the 1A specification of the original part.

Compliance Advantage: All Broadcom ASSR substitute parts are ROHS3 compliant with MSL 1 rating, compared to the PVG613S-T's RoHS non-compliance and MSL 4 rating. This provides improved environmental compliance and reduced moisture handling requirements during manufacturing and storage.

Frequently Asked Questions (FAQ)

Q: Can ASSR-1219-301E or ASSR-1219-501E replace the PVG613S-T? A: These parts are not suitable direct replacements. While they share identical package geometry and electrical interface, their 200mA load current rating is insufficient for applications requiring the PVG613S-T's 1A capability. Use only if your application load current does not exceed 200mA.

Q: Are ASSR-1511-301E and ASSR-1511-501E fully interchangeable? A: Yes. Both parts are electrically and mechanically identical. The difference is packaging: ASSR-1511-301E is supplied in Tube packaging, while ASSR-1511-501E is supplied in Cut Tape (CT) & Digi-Reel® format. Select based on your procurement and assembly requirements.

Q: What is the impact of the 1.3VDC input voltage on ASSR parts versus the 1.2VDC of PVG613S-T? A: The 0.1VDC difference is within standard design tolerance for SSR control circuits and does not affect functional compatibility. Control circuits designed for 1.2VDC input will operate reliably with 1.3VDC input specification.

Q: Can I use ASSR-1611-301E (2.5A) in place of PVG613S-T (1A)? A: Yes. ASSR-1611-301E provides higher current capability and lower on-state resistance (100 mOhms vs. 500 mOhms), resulting in reduced power dissipation. This is a suitable upgrade for applications where additional current margin or thermal performance is beneficial.

Q: What are the advantages of switching from PVG613S-T to ASSR substitute parts? A: Broadcom ASSR parts offer Active product status with guaranteed long-term availability, ROHS3 compliance, and MSL 1 rating (unlimited moisture exposure tolerance). The PVG613S-T is Obsolete with RoHS non-compliance and MSL 4 rating (72-hour moisture exposure limit), creating supply chain and manufacturing process risks.

Q: Are all substitute parts available in the same 6-SMD package? A: Yes. All substitute parts listed maintain the identical 6-SMD (0.300", 7.62mm) gull wing package with Surface Mount termination, ensuring PCB layout and assembly process compatibility without modification.