PVG613SPBF Equivalent & Substitute Parts

Part Overview

The PVG613SPBF is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switch with 1A load current capacity and 0-60V output voltage range. This component operates with 1.2VDC input and features a 500 mOhms maximum on-state resistance in a 6-SMD surface mount package.

The PVG613SPBF is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity and ensure component availability for new production runs and field replacements.

Key Parameters

Parameter	Value
Manufacturer	Infineon Technologies
Part Number	PVG613SPBF
Circuit Configuration	SPST-NO (1 Form A)
Output Type	AC, DC
Voltage - Input	1.2VDC
Voltage - Load	0 V ~ 60 V
Load Current	1 A
On-State Resistance (Max)	500 mOhms
Package / Case	6-SMD (0.300", 7.62mm)
Mounting Type	Surface Mount
Termination Style	Gull Wing
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the PVG613SPBF is determined by the following critical parameters:

Circuit Configuration: SPST-NO (1 Form A) - must remain constant
Package / Case: 6-SMD (0.300", 7.62mm) - physical and electrical compatibility requirement
Mounting Type: Surface Mount - PCB assembly compatibility
Termination Style: Gull Wing - soldering interface compatibility
Output Voltage Range: 0 V ~ 60 V - load switching capability
Load Current: Minimum 1 A - functional requirement
On-State Resistance: Maximum 500 mOhms - electrical performance threshold
Output Type: AC, DC - switching capability
RoHS Compliance: ROHS3 Compliant - regulatory requirement

Substitute parts must satisfy all these parameters. Parts with equal or superior electrical performance (lower on-state resistance, higher load current capacity) are functionally compatible. Input voltage differences (1.2VDC vs. 1.3VDC) do not prevent substitution as both operate within standard logic-level control ranges.

Parameter Comparison

Parameter	PVG613SPBF	PVG612SPBF	ASSR-1219-301E	ASSR-1219-501E	ASSR-1411-301E	ASSR-1411-501E	ASSR-1511-301E	ASSR-1511-501E	ASSR-1611-301E
Manufacturer	Infineon	Infineon	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom	Broadcom
Circuit Configuration	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO	SPST-NO
Output Type	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC	AC, DC
Voltage - Input	1.2VDC	1.2VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC	1.3VDC
Voltage - Load	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V	0 V ~ 60 V
Load Current	1 A	1 A	200 mA	200 mA	600 mA	600 mA	1 A	1 A	2.5 A
On-State Resistance (Max)	500 mOhms	500 mOhms	10 Ohms	10 Ohms	1 Ohm	1 Ohm	500 mOhms	500 mOhms	100 mOhms
Package / Case	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)	6-SMD (0.300", 7.62mm)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Termination Style	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing	Gull Wing
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Direct Equivalent (Recommended Primary Substitute)

PVG612SPBF is the direct equivalent from Infineon Technologies. This part maintains identical electrical specifications (1A load current, 500 mOhms on-state resistance) and physical package characteristics. The PVG612SPBF is in active production status, ensuring long-term availability and supply chain stability. This is the preferred substitute for direct replacement applications.

Broadcom ASSR Series Substitutes

The Broadcom ASSR series provides multiple substitution options based on load current requirements:

ASSR-1219-301E / ASSR-1219-501E: 200 mA load current. These parts operate within the 0-60V load voltage range but provide reduced current capacity. Suitable only for applications where 200 mA load current is sufficient.
ASSR-1411-301E / ASSR-1411-501E: 600 mA load current. These parts bridge the gap between 200 mA and 1A capacity. Suitable for applications requiring 600 mA or less.
ASSR-1511-301E / ASSR-1511-501E: 1 A load current with 500 mOhms on-state resistance. These parts provide exact electrical equivalence to the PVG613SPBF. Both tube and cut tape packaging options are available.
ASSR-1611-301E: 2.5 A load current with 100 mOhms on-state resistance. This part exceeds the original specifications, providing superior current handling and lower on-state resistance. Suitable for applications requiring higher current capacity or lower power dissipation.

All Broadcom ASSR parts feature improved moisture sensitivity (MSL 1 vs. MSL 4), indicating superior reliability in humid environments. All substitute parts maintain ROHS3 compliance and REACH unaffected status.

Frequently Asked Questions (FAQ)

Q: Can ASSR-1219-301E be used as a direct replacement for PVG613SPBF?

A: No. The ASSR-1219-301E is rated for 200 mA maximum load current, while the PVG613SPBF is rated for 1 A. Using the ASSR-1219-301E in a 1 A application will exceed its current rating and cause component failure.

Q: What is the difference between ASSR-1511-301E and ASSR-1511-501E?

A: Both parts have identical electrical specifications (1 A load current, 500 mOhms on-state resistance, 0-60V load voltage). The difference is packaging: ASSR-1511-301E is supplied in tube packaging, while ASSR-1511-501E is supplied in cut tape and digi-reel format. Select based on assembly line requirements.

Q: Why do some substitute parts have higher on-state resistance values?

A: The ASSR-1219 series (10 Ohms) is designed for lower current applications (200 mA). Higher on-state resistance is acceptable at lower currents because power dissipation remains within acceptable limits. For 1 A applications, select ASSR-1511 or ASSR-1611 series with 500 mOhms or 100 mOhms respectively.

Q: Is PVG612SPBF a better choice than ASSR-1511-301E?

A: PVG612SPBF is the direct Infineon equivalent and is recommended as the primary substitute due to manufacturer continuity and identical specifications. ASSR-1511-301E is a valid alternative from Broadcom with superior moisture sensitivity rating (MSL 1 vs. MSL 4).

Q: Can ASSR-1611-301E be used in place of PVG613SPBF?

A: Yes. The ASSR-1611-301E exceeds all electrical requirements of the PVG613SPBF (2.5 A vs. 1 A load current, 100 mOhms vs. 500 mOhms on-state resistance). It is electrically and mechanically compatible. This part is suitable when higher current capacity or lower power dissipation is beneficial.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Q: What is the significance of MSL (Moisture Sensitivity Level) differences?

A: MSL 4 (PVG613SPBF, PVG612SPBF) requires storage at controlled humidity for 72 hours before soldering. MSL 1 (all ASSR parts) indicates unlimited shelf life without humidity control. ASSR parts provide superior handling flexibility in manufacturing environments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message