PVG613S Equivalent & Substitute Parts

Part Overview

The PVG613S is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switch with 1A load current capacity and 0-60V output voltage range. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The PVG613S operates with a 1.2VDC input and features a 500 mOhms maximum on-state resistance in a 6-SMD surface mount package.

Substiute Parts

PVG613S

Infineon TechnologiesIn Stock: 2025PVG613S Datasheet

Current PartRFQ

ASSR-1219-301E

Broadcom LimitedIn Stock: 5908ASSR-1219-301E Datasheet

MFR RecommendedRFQ

ASSR-1219-501E

Broadcom LimitedIn Stock: 6087ASSR-1219-501E Datasheet

MFR RecommendedRFQ

ASSR-1411-301E

Broadcom LimitedIn Stock: 1488ASSR-1411-301E Datasheet

MFR RecommendedRFQ

ASSR-1411-501E

Broadcom LimitedIn Stock: 17810ASSR-1411-501E Datasheet

MFR RecommendedRFQ

ASSR-1511-301E

Broadcom LimitedIn Stock: 1342ASSR-1511-301E Datasheet

MFR RecommendedRFQ

ASSR-1511-501E

Broadcom LimitedIn Stock: 4336ASSR-1511-501E Datasheet

MFR RecommendedRFQ

ASSR-1611-301E

Broadcom LimitedIn Stock: 1441ASSR-1611-301E Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVG613S is determined by strict electrical and mechanical compatibility criteria:

Primary Substitution Criteria:

• Circuit configuration: SPST-NO (1 Form A) maintained across all substitutes
• Load voltage range: 0 V ~ 60 V (identical across all options)
• Package / Case: 6-SMD (0.300", 7.62mm) with Gull Wing termination (identical across all options)
• Output type: AC, DC capability (identical across all options)
• Mounting type: Surface Mount (identical across all options)

Load Current Compatibility: The PVG613S operates at 1A load current. Substitute parts are grouped by their load current ratings:

• 200 mA substitutes: ASSR-1219-301E, ASSR-1219-501E (lower current capacity)
• 600 mA substitutes: ASSR-1411-301E, ASSR-1411-501E (lower current capacity)
• 1A substitutes: ASSR-1511-301E, ASSR-1511-501E (equivalent current capacity)
• 2.5A substitutes: ASSR-1611-301E (higher current capacity)

All substitute parts are manufactured by Broadcom Limited and carry Active product status with ROHS3 compliance, contrasting with the obsolete status of the PVG613S.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Recommended for 1A Applications): ASSR-1511-301E and ASSR-1511-501E are the primary substitutes for the PVG613S. Both parts maintain the 1A load current specification and 500 mOhms on-state resistance, providing electrical equivalence. These parts are manufactured by Broadcom Limited with Active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment. The ASSR-1511-301E is packaged in Tube format, while ASSR-1511-501E is supplied in Cut Tape (CT) & Digi-Reel® format.

Higher Current Capacity Option: ASSR-1611-301E provides 2.5A load current capacity with 100 mOhms on-state resistance, suitable for applications requiring higher current margins or future design scaling. This part maintains all other electrical and mechanical parameters identical to the PVG613S.

Lower Current Capacity Options: ASSR-1219-301E, ASSR-1219-501E (200 mA) and ASSR-1411-301E, ASSR-1411-501E (600 mA) are suitable only for applications with reduced load current requirements below 1A. These parts exhibit higher on-state resistance (10 Ohms and 1 Ohms respectively) compared to the PVG613S specification.

All Broadcom ASSR series substitutes feature improved moisture sensitivity (MSL 1 vs. MSL 4) and ROHS3 compliance, providing superior environmental performance and regulatory compliance compared to the obsolete PVG613S.

Frequently Asked Questions (FAQ)

Q: Can ASSR-1219-301E or ASSR-1411-301E be used as direct replacements for PVG613S? A: These parts share identical package, circuit configuration, and voltage specifications but have reduced load current ratings (200 mA and 600 mA respectively versus 1A for PVG613S). They are suitable only if your application load current does not exceed their rated capacity.

Q: What is the difference between ASSR-1511-301E and ASSR-1511-501E? A: Both parts are electrically identical with 1A load current and 500 mOhms on-state resistance. The primary difference is packaging: ASSR-1511-301E is supplied in Tube format, while ASSR-1511-501E is supplied in Cut Tape (CT) & Digi-Reel® format. Selection depends on your assembly process requirements.

Q: Why do all Broadcom substitutes have 1.3VDC input voltage instead of 1.2VDC? A: The input voltage difference (1.3VDC vs. 1.2VDC) represents a minor specification variation between manufacturers. Both values fall within standard logic-level input ranges and do not affect functional compatibility in typical applications.

Q: Is ASSR-1611-301E suitable for PVG613S replacement? A: ASSR-1611-301E is electrically compatible with superior specifications: 2.5A load current (versus 1A) and 100 mOhms on-state resistance (versus 500 mOhms). It is suitable for direct replacement with the added benefit of higher current capacity and lower resistance.

Q: What are the compliance advantages of Broadcom ASSR substitutes? A: All Broadcom ASSR series parts are ROHS3 compliant and carry Active product status, ensuring regulatory alignment and long-term availability. The PVG613S is RoHS non-compliant and obsolete, making Broadcom substitutes necessary for new designs and production continuity.

Q: Are there packaging considerations when switching from PVG613S to ASSR substitutes? A: All substitute parts maintain the identical 6-SMD (0.300", 7.62mm) package with Gull Wing termination and Surface Mount configuration. No PCB layout or assembly process modifications are required for mechanical compatibility.