PVG612S-T Equivalent & Substitute Parts

Part Overview

The PVG612S-T is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switching device. This component operates with a 1.2VDC input signal and supports load voltages from 0V to 60V at a maximum current of 1A, suitable for both AC and DC applications.

The PVG612S-T carries an Obsolete product status, making it necessary to identify equivalent substitute components for new designs or ongoing production requirements. The primary substitute maintains identical electrical and mechanical specifications while offering Active product status and improved compliance certifications.

Substiute Parts

PVG612S-T

Infineon TechnologiesIn Stock: 2124PVG612S-T Datasheet

Current PartRFQ

PVG612S-TPBF

Infineon TechnologiesIn Stock: 10053PVG612S-TPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVG612S-T is based on strict equivalence across the following critical parameters:

• Circuit Configuration: SPST-NO (1 Form A) topology must remain unchanged
• Electrical Ratings: Input voltage (1.2VDC), load voltage range (0V–60V), and load current (1A) must be identical
• On-State Resistance: Maximum 500 mOhms specification must be maintained
• Package Specification: 6-SMD (0.300", 7.62mm) with Gull Wing termination
• Output Capability: AC and DC switching support required

The substitute part PVG612S-TPBF meets all these criteria while offering improved product status and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The PVG612S-TPBF is the direct equivalent substitute for the obsolete PVG612S-T. Both components share identical electrical and mechanical specifications, ensuring pin-for-pin and functional compatibility.

Selection of PVG612S-TPBF is recommended for the following reasons:

• Product Status: Active product status ensures ongoing availability and manufacturer support
• Compliance: ROHS3 compliance meets current regulatory requirements, whereas the original part is RoHS non-compliant
• Packaging Flexibility: Available in Cut Tape (CT) and Digi-Reel® formats, supporting both prototype and production volume requirements
• Electrical Equivalence: Maintains all critical electrical parameters including input voltage, load voltage range, current rating, and on-state resistance

No functional or performance differences exist between these components when applied within the specified electrical and thermal operating conditions.

Frequently Asked Questions (FAQ)

Q: Can PVG612S-TPBF be used as a direct replacement for PVG612S-T?

A: Yes. The PVG612S-TPBF is electrically and mechanically equivalent to the PVG612S-T. Both components feature identical circuit configuration (SPST-NO), input voltage (1.2VDC), load voltage range (0V–60V), load current (1A), on-state resistance (500 mOhms maximum), and package specification (6-SMD with Gull Wing termination). Pin-for-pin substitution is valid.

Q: What is the primary difference between PVG612S-T and PVG612S-TPBF?

A: The primary differences are product status and compliance certifications. PVG612S-T is Obsolete and RoHS non-compliant, while PVG612S-TPBF is Active and ROHS3 compliant. Electrical and mechanical specifications are identical.

Q: Are there any package or termination differences?

A: No. Both parts use the same 6-SMD (0.300", 7.62mm) package with Gull Wing termination. The PVG612S-TPBF offers additional packaging options (Cut Tape and Digi-Reel®) for procurement flexibility, but the physical component remains unchanged.

Q: What is the moisture sensitivity level for these components?

A: Both PVG612S-T and PVG612S-TPBF are rated MSL 4 (72 Hours), indicating moderate moisture sensitivity. Standard moisture control procedures during storage and handling are required.

Q: Can these relays switch both AC and DC loads?

A: Yes. Both components support AC and DC output types, making them suitable for applications requiring either load type within the specified voltage and current ratings.

Q: What is the on-state resistance specification?

A: The maximum on-state resistance for both components is 500 mOhms. This specification defines the resistance of the relay when in the conducting state and is critical for calculating power dissipation in the application circuit.