PVG612AS-T Equivalent & Substitute Parts

Part Overview

The PVG612AS-T is a solid-state relay (SSR) manufactured by Infineon Technologies, configured as a SPST-NO (Single Pole Single Throw - Normally Open) switching device. This component operates with a 1.2VDC input signal and supports load switching up to 60V at 2A, suitable for both AC and DC applications. The device is housed in a 6-SMD surface mount package with gull wing termination.

The PVG612AS-T carries an obsolete product status, making equivalent substitutes necessary for new designs and ongoing production requirements. Identifying compatible alternatives ensures design continuity and supply chain reliability.

Substiute Parts

PVG612AS-T

Infineon TechnologiesIn Stock: 798PVG612AS-T Datasheet

Current PartRFQ

PVG612AS-TPBF

Infineon TechnologiesIn Stock: 7367PVG612AS-TPBF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVG612AS-T is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: SPST-NO (1 Form A) topology must be maintained
• Voltage Ratings: Input voltage of 1.2VDC and load voltage range of 0–60V must be identical
• Load Current: Maximum switching current of 2A must be supported
• On-State Resistance: Maximum 100 mOhms specification must be met or exceeded
• Package / Case: 6-SMD (0.300", 7.62mm) with gull wing termination required for PCB compatibility
• Mounting Type: Surface mount configuration mandatory
• Output Type: AC and DC switching capability required

The PVG612AS-TPBF qualifies as a direct substitute, sharing identical electrical specifications and mechanical packaging while offering improved product status and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The PVG612AS-TPBF is the direct equivalent substitute for the obsolete PVG612AS-T. Both components share identical electrical and mechanical specifications, ensuring pin-for-pin and functional compatibility.

The PVG612AS-TPBF offers two significant advantages over the original part:

• Active Product Status: The substitute maintains current manufacturing and supply chain support from Infineon Technologies, eliminating obsolescence risk.
• RoHS3 Compliance: The substitute meets ROHS3 regulatory requirements, whereas the original part is non-compliant. This compliance status is critical for applications subject to environmental and regulatory standards.

For new designs and production transitions, the PVG612AS-TPBF is the appropriate selection. Existing designs using the PVG612AS-T can transition to the substitute without circuit modification or re-qualification, provided that RoHS compliance requirements are satisfied.

Frequently Asked Questions (FAQ)

Q: Can the PVG612AS-TPBF be used as a direct replacement for the PVG612AS-T?

A: Yes. The PVG612AS-TPBF is electrically and mechanically identical to the PVG612AS-T. Both components feature the same 1.2VDC input, 0–60V load voltage range, 2A switching current, 100 mOhms on-state resistance, and 6-SMD gull wing package. No circuit modifications are required.

Q: What is the primary difference between these two part numbers?

A: The PVG612AS-T is obsolete with RoHS non-compliant status. The PVG612AS-TPBF is an active product with ROHS3 compliance. The electrical and mechanical specifications are identical.

Q: Are there packaging differences between PVG612AS-T and PVG612AS-TPBF?

A: No. Both parts use the same 6-SMD (0.300", 7.62mm) package with gull wing termination. PCB footprints and assembly processes are identical.

Q: Why should I select the PVG612AS-TPBF over the PVG612AS-T?

A: The PVG612AS-TPBF is actively manufactured and stocked, ensuring supply availability. It also meets ROHS3 environmental compliance standards, which is required for many applications and markets. The obsolete PVG612AS-T presents supply chain risk and regulatory compliance concerns.

Q: Can I use this substitute in applications requiring RoHS compliance?

A: Yes. The PVG612AS-TPBF is ROHS3 compliant and suitable for applications with RoHS requirements. The original PVG612AS-T is not compliant.

Q: What is the moisture sensitivity level for these components?

A: Both the PVG612AS-T and PVG612AS-TPBF carry MSL 4 (72 Hours) rating. Standard moisture control procedures during storage, handling, and assembly are required.