PVC6Q100A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6Q100A01B00 is a 10 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production and maintenance applications. The part operates with ±10% tolerance and ±100ppm/°C temperature coefficient across a single turn adjustment range.

Substiute Parts

PVC6Q100A01B00

Bourns Inc.In Stock: 872PVC6Q100A01B00 Datasheet

Current PartRFQ

3362M-1-100LF

Bourns Inc.In Stock: 11093362M-1-100LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6Q100A01B00 is determined by the following critical parameters:

• Resistance value: 10 Ohms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1.0 Turn
• Adjustment type: Side Adjustment
• Mounting type: Through Hole
• Termination style: PC Pins

The 3362M-1-100LF qualifies as a direct substitute based on matching all critical electrical and mechanical parameters. While the resistive material differs (Cermet vs. Ceramic) and physical dimensions vary slightly, these differences remain within acceptable substitution criteria for this product category. The substitute maintains identical electrical performance specifications and functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

The 3362M-1-100LF is the qualified substitute for the obsolete PVC6Q100A01B00. Selection of this substitute is supported by the following factors:

• All critical electrical parameters match exactly: 10 Ohm resistance, 0.5W power rating, ±10% tolerance, and ±100ppm/°C temperature coefficient
• Functional compatibility is maintained across all adjustment, mounting, and termination specifications
• The substitute is currently in active production status, ensuring long-term availability
• ROHS3 compliance of the substitute provides regulatory advantage over the non-compliant original part
• Physical dimensions are comparable with minor reductions (approximately 12% smaller face area), suitable for standard through-hole PCB layouts
• Cermet resistive material in the substitute provides equivalent performance characteristics to the ceramic material in the original part

Frequently Asked Questions (FAQ)

Q: Can the 3362M-1-100LF be used as a direct replacement for the PVC6Q100A01B00 in existing designs?

A: Yes. The substitute maintains identical electrical specifications (10 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C) and functional characteristics (side adjustment, through-hole mounting, PC pin termination). The slightly smaller physical dimensions do not affect electrical performance or standard PCB hole spacing compatibility.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers?

A: Both materials meet the specified electrical performance parameters for this application. Cermet (ceramic-metal composite) in the 3362M-1-100LF provides equivalent resistance stability and temperature coefficient performance as the ceramic material in the PVC6Q100A01B00.

Q: Does the substitute part meet current regulatory requirements?

A: The 3362M-1-100LF is ROHS3 compliant and REACH affected, providing compliance with current environmental regulations. The original PVC6Q100A01B00 is RoHS non-compliant and REACH unaffected, reflecting its obsolete status.

Q: Are there packaging differences between the main part and substitute?

A: The PVC6Q100A01B00 is supplied in standard packaging, while the 3362M-1-100LF is packaged in tubes. Both formats are suitable for standard component handling and assembly processes.

Q: What is the inventory status of the substitute part?

A: The 3362M-1-100LF is actively manufactured and maintained in stock (1024 Pcs New Original In Stock), ensuring reliable availability for production requirements.