PVC6M204A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6M204A01B00 is a 200 kOhms 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, 1-turn top adjustment, and PC pin termination. This part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. The part operates within a ±10% tolerance and ±100ppm/°C temperature coefficient range, suitable for precision adjustment applications in electronic circuits.

Substiute Parts

PVC6M204A01B00

Bourns Inc.In Stock: 1078PVC6M204A01B00 Datasheet

Current PartRFQ

3362U-1-204LF

Bourns Inc.In Stock: 11883362U-1-204LF Datasheet

DirectRFQ

82PR200KLF

TT Electronics/BIIn Stock: 96682PR200KLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6M204A01B00 is determined by strict alignment across the following critical parameters: resistance value (200 kOhms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1), adjustment type (top adjustment), mounting type (through hole), and termination style (PC pins).

The identified substitutes meet all electrical specifications and mechanical interface requirements. Variations in resistive material (ceramic to cermet) and physical dimensions remain within acceptable bounds for through-hole PCB mounting applications. Packaging and compliance status differ between candidates, requiring evaluation based on production requirements and regulatory constraints.

Parameter Comparison

Engineering Selection Recommendations

The 3362U-1-204LF represents the primary substitute option. Manufactured by Bourns Inc., it maintains identical electrical specifications and mechanical interface compatibility with the PVC6M204A01B00. The part carries Active product status with ROHS3 compliance, supporting modern supply chain requirements. The shift from ceramic to cermet resistive material does not affect functional performance within the specified tolerance and temperature coefficient parameters. Packaging in tube format accommodates standard component handling procedures.

The 82PR200KLF provides an alternative substitute manufactured by TT Electronics/BI. This part meets all electrical and mechanical requirements with Active product status and ROHS3 compliance. The round physical form factor (0.250" diameter) differs from the square geometry of the original part but maintains through-hole PC pin compatibility. Bulk packaging format requires evaluation against procurement workflows.

Both substitutes support applications requiring 200 kOhms resistance at 0.5W power dissipation with 1-turn top adjustment through-hole mounting. Selection between candidates depends on packaging requirements, supply chain preferences, and compliance documentation needs.

Frequently Asked Questions (FAQ)

Q: Can the 3362U-1-204LF directly replace the PVC6M204A01B00 in existing designs?

A: Yes. The 3362U-1-204LF matches all critical electrical parameters (200 kOhms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient) and mechanical interface specifications (1-turn top adjustment, through-hole mounting, PC pin termination). Physical dimensions vary slightly (rectangular 0.275" x 0.260" versus square 0.272" x 0.272"), but both fit standard through-hole PCB layouts.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers?

A: Both materials meet the specified electrical performance parameters for this application. Cermet construction in the substitute parts provides enhanced stability and reliability characteristics. The functional performance within the ±10% tolerance and ±100ppm/°C temperature coefficient remains equivalent.

Q: Are there compliance differences between the substitute parts?

A: The PVC6M204A01B00 is RoHS non-compliant. Both substitutes (3362U-1-204LF and 82PR200KLF) are ROHS3 compliant. The 3362U-1-204LF is REACH Affected, while the 82PR200KLF is REACH Unaffected. Compliance requirements should be evaluated against specific application and regional regulations.

Q: How do packaging formats affect part selection?

A: The 3362U-1-204LF is supplied in tube packaging, supporting standard component handling and placement equipment. The 82PR200KLF is supplied in bulk format, requiring alternative handling procedures. Packaging selection depends on production volume, automation capabilities, and inventory management practices.

Q: Can physical dimension differences impact PCB layout compatibility?

A: The PVC6M204A01B00 features a square 0.272" x 0.272" face. The 3362U-1-204LF is rectangular 0.275" x 0.260", and the 82PR200KLF is round 0.250" diameter. All three maintain through-hole PC pin termination compatible with standard PCB hole spacing. Layout verification is necessary for designs with tight component spacing constraints.