PVC6H204C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6H204C01B00 is a 200 kOhms, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitutes necessary for ongoing design support and procurement continuity. The substitute part identified maintains functional equivalence across critical electrical and mechanical parameters while offering active product status and improved availability.

Substiute Parts

PVC6H204C01B00

Bourns Inc.In Stock: 1098PVC6H204C01B00 Datasheet

Current PartRFQ

3362X-1-204LF

Bourns Inc.In Stock: 11633362X-1-204LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6H204C01B00 with the 3362X-1-204LF is valid based on the following matching parameters:

• Resistance value: 200 kOhms (identical)
• Power rating: 0.5W, 1/2W (identical)
• Tolerance: ±10% (identical)
• Temperature coefficient: ±100ppm/°C (identical)
• Number of turns: 1.0 Turn (identical)
• Adjustment type: Side Adjustment (identical)
• Mounting type: Through Hole (identical)
• Termination style: PC Pins (identical)
• RoHS compliance: ROHS3 Compliant (identical)

The primary difference is the resistive material composition: the original part uses ceramic material, while the substitute uses cermet material. Both materials are acceptable for this application category and maintain the specified electrical performance. The substitute part is currently in active production status with improved inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The 3362X-1-204LF is the direct substitute for the obsolete PVC6H204C01B00. Both parts are manufactured by Bourns Inc. and maintain identical electrical specifications across resistance, power rating, tolerance, and temperature coefficient. The substitute part carries active product status, ensuring long-term availability and supply chain continuity.

Both parts meet ROHS3 compliance requirements. The substitute part is REACH Affected, whereas the original part is REACH Unaffected; compliance verification with applicable regulations is required during design transition.

The substitute part features a slightly smaller face dimension (6.99mm x 6.60mm versus 8.00mm x 6.90mm). PCB layout verification is necessary to confirm mechanical fit within existing mounting footprints.

Frequently Asked Questions (FAQ)

Q: Can the 3362X-1-204LF directly replace the PVC6H204C01B00 in existing designs?

A: Yes, provided that the smaller face dimension (6.99mm x 6.60mm) accommodates the existing PCB layout. All electrical parameters, including resistance, power rating, tolerance, and temperature coefficient, are identical. The adjustment type, mounting method, and termination style are equivalent.

Q: What is the difference between ceramic and cermet resistive materials in this application?

A: Both ceramic and cermet materials are acceptable for trimmer potentiometer applications and maintain the specified electrical performance. The cermet material used in the substitute part is part of the Trimpot® 3362 sealed series, which is actively manufactured and widely available.

Q: Are there any compliance differences between the two parts?

A: Both parts are ROHS3 compliant. The substitute part is REACH Affected, while the original part is REACH Unaffected. Compliance requirements must be verified against applicable regulations for your specific application and market.

Q: What is the packaging difference?

A: The original part has unspecified packaging, while the substitute part is supplied in tube packaging. This does not affect electrical or mechanical performance.

Q: Should I conduct any additional testing before implementing the substitute part?

A: Mechanical fit verification on the PCB is necessary due to the dimensional difference. Electrical performance is equivalent across all specified parameters.