PVC6H101A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6H101A01B00 is a 100 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitutes necessary for ongoing design support and procurement continuity. The part operates with ±10% tolerance and ±100ppm/°C temperature coefficient across a single turn adjustment range.

Substiute Parts

PVC6H101A01B00

Bourns Inc.In Stock: 913PVC6H101A01B00 Datasheet

Current PartRFQ

3362X-1-101LF

Bourns Inc.In Stock: 12523362X-1-101LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6H101A01B00 is determined by the following critical parameters:

• Resistance value: 100 Ohms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1 turn
• Adjustment type: Side adjustment
• Mounting type: Through hole
• Termination style: PC pins

The substitute part 3362X-1-101LF meets all electrical and mechanical compatibility criteria. While the resistive material differs (cermet vs. ceramic), both materials satisfy the specified electrical performance parameters. The substitute features a smaller footprint and active product status, providing improved availability and compliance posture.

Parameter Comparison

Engineering Selection Recommendations

The 3362X-1-101LF is a direct functional substitute for the PVC6H101A01B00. Both parts satisfy identical electrical specifications across resistance, power rating, tolerance, and temperature coefficient parameters. The substitute offers improved compliance status with ROHS3 certification and active product availability, addressing the obsolescence of the original part.

The dimensional difference (approximately 0.04" reduction in both axes) requires PCB layout verification to confirm mechanical fit within existing mounting footprints. The cermet resistive material in the substitute provides equivalent performance within the specified electrical parameters.

Frequently Asked Questions (FAQ)

Q: Can the 3362X-1-101LF directly replace the PVC6H101A01B00 in existing designs?

A: Electrical compatibility is confirmed across all specified parameters. Physical fit must be verified due to the smaller footprint of the substitute part (6.99mm x 6.60mm vs. 8.00mm x 6.90mm).

Q: What is the difference between ceramic and cermet resistive materials in this application?

A: Both materials meet the specified electrical performance criteria of ±10% tolerance and ±100ppm/°C temperature coefficient. The cermet material in the substitute provides equivalent functional performance for this 100 Ohm, 0.5W application.

Q: Does the substitute part require any design changes?

A: The substitute maintains identical electrical specifications and termination style. PCB layout review is necessary to confirm the smaller physical dimensions accommodate existing mounting hole spacing and clearance requirements.

Q: What is the compliance advantage of the substitute part?

A: The 3362X-1-101LF carries ROHS3 compliance certification, whereas the original PVC6H101A01B00 is non-compliant. This improves regulatory alignment for new production and procurement cycles.

Q: Are both parts available from the same manufacturer?

A: Yes, both parts are manufactured by Bourns Inc. The substitute is currently in active production status with higher inventory availability compared to the obsolete original part.