PVC6G205C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6G205C01B00 is a 2 MOhm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning. The substitute part identified maintains the same electrical specifications and mechanical interface requirements.

Substiute Parts

PVC6G205C01B00

Bourns Inc.In Stock: 1118PVC6G205C01B00 Datasheet

Current PartRFQ

3362W-1-205LF

Bourns Inc.In Stock: 10723362W-1-205LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 3362W-1-205LF qualifies as a direct substitute based on the following matching parameters:

• Resistance value: 2 MOhms (identical)
• Power rating: 0.5W, 1/2W (identical)
• Tolerance: ±10% (identical)
• Temperature coefficient: ±100ppm/°C (identical)
• Number of turns: 1.0 (identical)
• Adjustment type: Side Adjustment (identical)
• Mounting type: Through Hole (identical)
• Termination style: PC Pins (identical)

The primary difference is the resistive material composition: the PVC6G205C01B00 uses ceramic material, while the 3362W-1-205LF uses cermet material. Both materials meet the specified electrical performance requirements for this resistance and power rating.

Parameter Comparison

Engineering Selection Recommendations

The 3362W-1-205LF is the appropriate substitute for the obsolete PVC6G205C01B00. Both components are manufactured by Bourns Inc. and maintain identical electrical specifications across resistance, power rating, tolerance, and temperature coefficient. Both are ROHS3 compliant.

The 3362W-1-205LF carries active product status, ensuring continued availability and manufacturing support. The cermet resistive material in the substitute provides equivalent performance to the ceramic material in the original part across the specified operating parameters.

Physical dimensions differ slightly, with the substitute being marginally smaller. PCB layout verification is required to confirm fit within existing mounting footprints, particularly for the face dimensions and PC pin spacing.

Frequently Asked Questions (FAQ)

Q: Can the 3362W-1-205LF directly replace the PVC6G205C01B00 in existing designs?

A: Electrical substitution is valid based on matching resistance, power rating, tolerance, temperature coefficient, and adjustment characteristics. Physical verification of PCB footprint compatibility is necessary due to dimensional differences.

Q: What is the significance of the resistive material difference between ceramic and cermet?

A: Both ceramic and cermet materials meet the specified electrical performance requirements for this 2 MOhm, 0.5W application. The material difference does not affect the core electrical parameters provided in the specifications.

Q: Why is the original part listed as obsolete?

A: The PVC6G205C01B00 is classified as obsolete by the manufacturer. The 3362W-1-205LF, part of the active Trimpot® 3362 series, represents the current production equivalent.

Q: Are there packaging differences between these parts?

A: The PVC6G205C01B00 is supplied in standard packaging, while the 3362W-1-205LF is supplied in tube packaging. Both are suitable for through-hole assembly processes.

Q: Do both parts meet the same compliance standards?

A: Both parts are ROHS3 compliant. The 3362W-1-205LF is REACH affected, while the original part is REACH unaffected. Compliance verification against specific project requirements is recommended.