PVC6G204C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6G204C01B00 is a 200 kOhms, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitutes necessary for ongoing design support and procurement continuity. The substitute part identified maintains functional equivalence across critical electrical and mechanical parameters while offering active product status and improved availability.

Substiute Parts

PVC6G204C01B00

Bourns Inc.In Stock: 1189PVC6G204C01B00 Datasheet

Current PartRFQ

3362W-1-204LF

Bourns Inc.In Stock: 14123362W-1-204LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6G204C01B00 with the 3362W-1-204LF is valid based on the following matched parameters:

• Resistance value: 200 kOhms (identical)
• Power rating: 0.5W, 1/2W (identical)
• Tolerance: ±10% (identical)
• Temperature coefficient: ±100ppm/°C (identical)
• Number of turns: 1 Turn (identical)
• Adjustment type: Side Adjustment (identical)
• Mounting type: Through Hole (identical)
• Termination style: PC Pins (identical)
• RoHS compliance: ROHS3 Compliant (both parts)

The primary difference is the resistive material composition: the original part uses ceramic material, while the substitute uses cermet material. Both materials are acceptable for this application category and maintain the specified electrical performance within tolerance.

Parameter Comparison

Engineering Selection Recommendations

The 3362W-1-204LF is a direct functional substitute for the obsolete PVC6G204C01B00. Both parts meet ROHS3 compliance requirements and maintain identical electrical specifications across resistance, power rating, tolerance, and temperature coefficient parameters.

The substitute part offers the advantage of active product status, ensuring long-term availability and supply chain continuity. The dimensional difference is minor (approximately 1.5% reduction in face dimensions), and both parts utilize identical through-hole PC pin termination suitable for standard PCB mounting.

The resistive material change from ceramic to cermet does not affect the specified electrical performance within the stated tolerance and temperature coefficient ranges for this application category.

Frequently Asked Questions (FAQ)

Q: Can the 3362W-1-204LF directly replace the PVC6G204C01B00 on existing PCBs?

A: Yes. Both parts share identical electrical specifications (200 kOhms, 0.5W, ±10% tolerance, ±100ppm/°C), identical adjustment type (side adjustment), and identical termination style (PC pins). The minor dimensional difference (approximately 1.5% smaller face) does not affect PCB mounting compatibility for standard through-hole layouts.

Q: What is the difference between ceramic and cermet resistive materials in this application?

A: Both materials meet the specified electrical performance parameters. Cermet material in the 3362W-1-204LF provides enhanced sealing characteristics, which is reflected in the active product status and improved long-term availability compared to the obsolete ceramic version.

Q: Are both parts RoHS compliant?

A: Yes. Both the PVC6G204C01B00 and 3362W-1-204LF are ROHS3 compliant, meeting current environmental and regulatory requirements.

Q: Why is the original part listed as obsolete?

A: The PVC6G204C01B00 has been discontinued by the manufacturer. The 3362W-1-204LF represents the active equivalent within Bourns Inc.'s current product portfolio, offering the same functional performance with ongoing manufacturing support.

Q: Are there packaging differences between these parts?

A: The original part is supplied in standard packaging, while the substitute (3362W-1-204LF) is supplied in tube packaging. Both packaging formats are suitable for standard component handling and assembly processes.