PVC6G201A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6G201A01B00 is a 200 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production and maintenance applications. The primary driver for substitution is product discontinuation, requiring equivalent components that maintain functional and mechanical compatibility with existing designs.

Substiute Parts

PVC6G201A01B00

Bourns Inc.In Stock: 1200PVC6G201A01B00 Datasheet

Current PartRFQ

3362W-1-201LF

Bourns Inc.In Stock: 12213362W-1-201LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6G201A01B00 is determined by strict equivalence across the following parameters:

• Resistance value: 200 Ohms (exact match required)
• Power rating: 0.5W / 1/2W (exact match required)
• Tolerance: ±10% (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Number of turns: 1 (exact match required)
• Adjustment type: Side Adjustment (exact match required)
• Mounting type: Through Hole (exact match required)
• Termination style: PC Pins (exact match required)

The 3362W-1-201LF meets all mandatory electrical and mechanical parameters. While the resistive material differs (Cermet vs. Ceramic) and physical dimensions are slightly smaller, these variations remain within acceptable substitution criteria for this product category. The primary distinction is product status: the substitute is active and RoHS3 compliant, whereas the original part is obsolete and RoHS non-compliant.

Parameter Comparison

Engineering Selection Recommendations

The 3362W-1-201LF is a direct functional substitute for the PVC6G201A01B00. Selection of this substitute is justified by:

• Identical electrical specifications across all critical parameters (resistance, power rating, tolerance, temperature coefficient)
• Identical mechanical interface (through-hole mounting, PC pin termination, side adjustment)
• Active product status ensuring long-term availability and supply chain continuity
• RoHS3 compliance, meeting current regulatory requirements for new designs and production
• Smaller physical footprint, which may provide layout advantages in space-constrained applications
• Same manufacturer (Bourns Inc.), ensuring consistent quality and performance standards

The shift from ceramic to cermet resistive material in the substitute part does not affect functional compatibility for this application category, as both materials meet the specified electrical performance parameters.

Frequently Asked Questions (FAQ)

Q: Can the 3362W-1-201LF be used as a direct replacement for the PVC6G201A01B00 in existing designs?

A: Yes. The substitute part meets all mandatory electrical and mechanical specifications. The smaller physical dimensions may require PCB layout verification to confirm adequate clearance around the component footprint.

Q: What is the difference between ceramic and cermet resistive materials in trimmer potentiometers?

A: Both materials achieve the specified electrical performance for this application. Cermet (ceramic-metal composite) is commonly used in sealed trimmer designs and offers enhanced environmental protection. The choice between materials does not affect functional compatibility when electrical specifications are identical.

Q: Does the size difference between the two parts affect PCB compatibility?

A: The 3362W-1-201LF is physically smaller than the PVC6G201A01B00. Existing PCB designs must be evaluated to confirm adequate clearance. The smaller footprint may allow for more compact layouts in new designs.

Q: Why is RoHS compliance important for this substitution?

A: The PVC6G201A01B00 is RoHS non-compliant, while the 3362W-1-201LF is RoHS3 compliant. For new production runs and designs intended for markets with RoHS requirements, the substitute part ensures regulatory compliance and reduces supply chain risk.

Q: Are there any electrical performance differences between the two parts?

A: No. Both parts are specified with identical resistance (200 Ohms), power rating (0.5W), tolerance (±10%), and temperature coefficient (±100ppm/°C). Electrical performance is equivalent.

Q: What packaging format is the substitute part supplied in?

A: The 3362W-1-201LF is supplied in tube packaging, whereas the original part information does not specify packaging format. Confirm packaging requirements for your procurement process.