PVC6G100A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6G100A01B00 is a 10 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitute components essential for ongoing design support and production continuity. Equivalent parts must maintain the same electrical specifications and mechanical compatibility to ensure direct replacement capability.

Substiute Parts

PVC6G100A01B00

Bourns Inc.In Stock: 1161PVC6G100A01B00 Datasheet

Current PartRFQ

3362W-1-100LF

Bourns Inc.In Stock: 10913362W-1-100LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6G100A01B00 is determined by strict equivalence across the following parameters: resistance value (10 Ohms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1.0), adjustment type (side adjustment), mounting type (through hole), and termination style (PC pins). The resistive material may vary between ceramic and cermet formulations while maintaining electrical performance within specified tolerances. Physical dimensions must accommodate the original mounting footprint or be verified for mechanical compatibility in the target application.

Parameter Comparison

Engineering Selection Recommendations

The 3362W-1-100LF serves as a direct electrical equivalent to the PVC6G100A01B00, matching all critical electrical parameters including resistance, power rating, tolerance, and temperature coefficient. The primary distinction is product status: the PVC6G100A01B00 is obsolete, while the 3362W-1-100LF is active and available. The 3362W-1-100LF offers improved compliance posture, meeting ROHS3 requirements compared to the non-compliant status of the original part. The resistive material differs (cermet versus ceramic), which does not affect electrical performance within the specified tolerances. Physical dimensions are slightly smaller on the 3362W-1-100LF; mechanical fit must be verified for the target PCB layout. The 3362W-1-100LF is supplied in tube packaging, whereas the original part number does not specify packaging format.

Frequently Asked Questions (FAQ)

Q: Can the 3362W-1-100LF replace the PVC6G100A01B00 in existing designs?

A: Yes, the 3362W-1-100LF is electrically equivalent across all specified parameters. Mechanical verification is required due to minor dimensional differences (0.315" x 0.272" versus 0.275" x 0.260" face dimensions). PCB layout and mounting clearance must be confirmed before implementation.

Q: What is the difference between ceramic and cermet resistive materials in this application?

A: Both materials meet the specified electrical performance criteria (10 Ohms, ±10% tolerance, ±100ppm/°C temperature coefficient). Cermet formulation in the 3362W-1-100LF provides enhanced reliability and environmental stability, contributing to its active product status and RoHS3 compliance.

Q: Is the 3362W-1-100LF suitable for new designs?

A: Yes. The 3362W-1-100LF is an active product with current manufacturing support, RoHS3 compliance, and equivalent electrical specifications. It is the recommended choice for new applications requiring a 10 Ohm, 0.5W, side-adjustment trimmer potentiometer with PC pin termination.

Q: Are there packaging considerations when switching to the 3362W-1-100LF?

A: The 3362W-1-100LF is supplied in tube packaging. Verify that your procurement and assembly processes accommodate this packaging format. Reel or tape packaging alternatives may be available through the manufacturer.

Q: What compliance advantages does the 3362W-1-100LF offer?

A: The 3362W-1-100LF meets ROHS3 compliance requirements, whereas the PVC6G100A01B00 is RoHS non-compliant. For applications subject to RoHS directives or customer compliance mandates, the 3362W-1-100LF is the appropriate selection.