PVC6E254C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E254C01B00 is a 250 kOhms, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitutes necessary for ongoing design support and procurement continuity. The part operates with ±10% tolerance and ±100ppm/°C temperature coefficient across a single turn adjustment range.

Substiute Parts

PVC6E254C01B00

Bourns Inc.In Stock: 853PVC6E254C01B00 Datasheet

Current PartRFQ

3362S-1-254LF

Bourns Inc.In Stock: 16263362S-1-254LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6E254C01B00 is determined by the following critical parameters:

• Resistance value: 250 kOhms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1.0 turn
• Adjustment type: Side adjustment
• Mounting type: Through hole
• Termination style: PC pins
• RoHS compliance: ROHS3 or equivalent

The 3362S-1-254LF meets all substitution criteria. While the resistive material differs (cermet vs. ceramic), both materials satisfy the electrical performance requirements for this application category. The dimensional difference is within acceptable tolerance for through-hole PC pin mounting.

Parameter Comparison

Engineering Selection Recommendations

The 3362S-1-254LF is the qualified substitute for the PVC6E254C01B00. Selection is based on:

• All critical electrical parameters match exactly: resistance, power rating, tolerance, and temperature coefficient
• Functional equivalence: identical adjustment type, mounting configuration, and termination style
• Compliance status: both parts are ROHS3 compliant
• Product availability: the substitute is active production status, ensuring long-term procurement viability
• The cermet resistive material in the substitute provides equivalent performance within the specified tolerance and temperature coefficient ranges for this application category

The 3362S-1-254LF is available in tube packaging with 1543 units in stock, compared to the obsolete PVC6E254C01B00 with limited remaining inventory of 751 units.

Frequently Asked Questions (FAQ)

Q: Can the 3362S-1-254LF replace the PVC6E254C01B00 in existing designs?

A: Yes. All critical electrical and mechanical parameters are identical. The parts are functionally equivalent for through-hole PC pin applications requiring 250 kOhms, 0.5W, side-adjustment trimmer potentiometers.

Q: What is the difference between ceramic and cermet resistive materials in this application?

A: Both materials meet the specified tolerance (±10%) and temperature coefficient (±100ppm/°C) requirements. The cermet material in the 3362S-1-254LF provides equivalent electrical performance for this product category.

Q: Are there dimensional compatibility concerns?

A: The 3362S-1-254LF has a slightly smaller face dimension (0.275" x 0.260" vs. 0.315" x 0.272"), but both use identical PC pin through-hole termination. PCB layout compatibility depends on specific hole spacing and mounting pad design in your application.

Q: What is the packaging difference?

A: The PVC6E254C01B00 is supplied in standard packaging, while the 3362S-1-254LF is supplied in tube packaging. Both are suitable for automated assembly processes.

Q: Is the 3362S-1-254LF REACH compliant?

A: The 3362S-1-254LF is REACH Affected, whereas the PVC6E254C01B00 is REACH Unaffected. Verify REACH compliance requirements for your specific application and end-use market.