PVC6E252C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E252C01B00 is a 2.5 kOhms, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production and maintenance applications. The PVC6 series has been superseded by newer product lines, necessitating equivalent component selection based on electrical and mechanical compatibility.

Substiute Parts

PVC6E252C01B00

Bourns Inc.In Stock: 721PVC6E252C01B00 Datasheet

Current PartRFQ

3362W-1-252

Bourns Inc.In Stock: 10973362W-1-252 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6E252C01B00 is determined by strict equivalence across the following critical parameters:

• Resistance value: 2.5 kOhms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1.0 Turn
• Adjustment type: Side Adjustment
• Mounting type: Through Hole
• Termination style: PC Pins

The 3362W-1-252 meets all electrical specifications and mechanical requirements for direct substitution. Both components share identical resistance, power rating, tolerance, temperature coefficient, and adjustment characteristics. The primary difference lies in the resistive material composition and physical footprint, which remain within acceptable mechanical compatibility for through-hole PCB applications.

Parameter Comparison

Engineering Selection Recommendations

The 3362W-1-252 is a direct electrical equivalent to the PVC6E252C01B00 and serves as the primary substitute for this obsolete component. Both parts are manufactured by Bourns Inc. and maintain identical electrical performance across all critical parameters.

Selection considerations based on provided specifications:

The PVC6E252C01B00 is ROHS3 compliant, while the 3362W-1-252 is RoHS non-compliant. Applications requiring RoHS compliance must evaluate regulatory requirements before substitution. The 3362W-1-252 is REACH Affected, whereas the original part is REACH Unaffected. Organizations subject to REACH regulations must assess supply chain implications.

The 3362W-1-252 is currently in active production with 1043 units in stock, compared to the obsolete PVC6E252C01B00 with limited remaining inventory of 656 units. The substitute component is packaged in tubes, whereas the original part packaging is not specified.

The resistive material differs: ceramic in the original versus cermet in the substitute. Both materials support the specified electrical characteristics and temperature coefficient. The physical footprint of the 3362W-1-252 is slightly smaller, which may require PCB layout verification for existing designs.

Frequently Asked Questions (FAQ)

Q: Can the 3362W-1-252 be used as a direct replacement for the PVC6E252C01B00?

A: Yes. Both components share identical electrical specifications: 2.5 kOhms resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn adjustment, side adjustment type, through-hole mounting, and PC pin termination. The 3362W-1-252 is the active production equivalent.

Q: What are the differences between these two parts?

A: The primary differences are: (1) resistive material—ceramic versus cermet; (2) physical dimensions—the 3362W-1-252 is slightly smaller; (3) product status—the 3362W-1-252 is active production while the PVC6E252C01B00 is obsolete; (4) compliance—the original is ROHS3 compliant and REACH unaffected, while the substitute is RoHS non-compliant and REACH affected.

Q: Are there any PCB layout considerations when substituting?

A: The 3362W-1-252 has a smaller face dimension (0.275" x 0.260" versus 0.315" x 0.272"). Verify that the reduced footprint does not create clearance issues with adjacent components or PCB traces. The PC pin termination and through-hole mounting remain compatible with existing designs.

Q: Which part should be selected for new designs?

A: The 3362W-1-252 should be selected for new designs. It is in active production, has superior availability, and represents the current Bourns equivalent in the Trimpot® 3362 series.

Q: Does the change from ceramic to cermet resistive material affect performance?

A: Both ceramic and cermet materials meet the specified electrical parameters for this application. The temperature coefficient, tolerance, and power rating remain identical. Material selection does not impact functional compatibility for the stated specifications.

Q: What is the compliance impact of substitution?

A: Organizations requiring ROHS3 compliance should note that the 3362W-1-252 is RoHS non-compliant. Applications subject to REACH regulations must account for the REACH Affected status of the substitute. Evaluate regulatory requirements for your specific application before proceeding with substitution.