Bourns PVC6E205C01B00 Trimmer Potentiometer - Equivalent & Substitute Parts

Part Overview

The Bourns PVC6E205C01B00 is a 2 MOhm, 0.5W through-hole trimmer potentiometer with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making identification of suitable substitutes necessary for ongoing production and maintenance applications. The part is ROHS3 compliant and MSL Level 1, indicating broad environmental compatibility.

Substiute Parts

PVC6E205C01B00

Bourns Inc.In Stock: 923PVC6E205C01B00 Datasheet

Current PartRFQ

3362S-1-205LF

Bourns Inc.In Stock: 8873362S-1-205LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The Bourns 3362S-1-205LF qualifies as a direct substitute based on the following critical parameters:

• Resistance value: 2 MOhms (identical)
• Power rating: 0.5W, 1/2W (identical)
• Tolerance: ±10% (identical)
• Temperature coefficient: ±100ppm/°C (identical)
• Number of turns: 1 (identical)
• Adjustment type: Side Adjustment (identical)
• Mounting type: Through Hole (identical)
• Termination style: PC Pins (identical)

The primary difference is the resistive material composition: the substitute uses Cermet instead of Ceramic. Both materials meet the specified electrical performance parameters. The 3362S is an active product from the Trimpot® 3362 Sealed series, providing ongoing availability and support.

Parameter Comparison

Engineering Selection Recommendations

The 3362S-1-205LF is the appropriate substitute for the obsolete PVC6E205C01B00. Both components are manufactured by Bourns Inc. and maintain identical electrical specifications across all critical parameters: resistance, power rating, tolerance, temperature coefficient, and adjustment characteristics.

The substitute offers the advantage of active product status, ensuring continued availability and manufacturing support. Both parts meet ROHS3 compliance requirements. The slightly smaller physical footprint of the 3362S (6.99mm x 6.60mm versus 8.00mm x 6.90mm) requires PCB layout verification to confirm mechanical fit within existing designs.

The resistive material change from Ceramic to Cermet does not affect electrical performance within the specified tolerance and temperature coefficient ranges. The 3362S series incorporates sealed construction, which may provide enhanced environmental protection in certain applications.

Frequently Asked Questions (FAQ)

Q: Can the 3362S-1-205LF be used as a direct replacement for the PVC6E205C01B00?

A: Yes. Both components share identical electrical specifications: 2 MOhm resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 1-turn side adjustment, through-hole mounting, and PC pin termination. Physical dimensions differ slightly; PCB layout verification is required.

Q: What is the difference between Ceramic and Cermet resistive materials in this application?

A: Both materials meet the specified electrical performance parameters. Cermet construction in the 3362S provides sealed design characteristics. The electrical performance—resistance value, tolerance, and temperature coefficient—remains identical across both material types.

Q: Is the 3362S-1-205LF available for new designs?

A: Yes. The 3362S-1-205LF carries active product status, ensuring ongoing manufacturing and supply availability. The PVC6E205C01B00 is obsolete and should not be specified for new designs.

Q: Are there compliance differences between these parts?

A: Both parts are ROHS3 compliant. The 3362S-1-205LF is REACH Affected, while the PVC6E205C01B00 is REACH Unaffected. Verify REACH compliance requirements for your specific application and end-use region.

Q: What packaging is available for the substitute part?

A: The 3362S-1-205LF is supplied in Tube packaging. Confirm packaging requirements for your procurement and assembly processes.