PVC6E205A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E205A01B00 is a 2 MOhm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making substitute parts necessary for new designs and ongoing production requirements. The PVC6 series has been superseded by more modern alternatives that maintain electrical compatibility while offering improved availability and compliance status.

Substiute Parts

PVC6E205A01B00

Bourns Inc.In Stock: 1084PVC6E205A01B00 Datasheet

Current PartRFQ

3362S-1-205LF

Bourns Inc.In Stock: 8873362S-1-205LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 3362S-1-205LF qualifies as a direct substitute for the PVC6E205A01B00 based on the following critical parameters:

• Identical resistance value: 2 MOhms
• Identical power rating: 0.5W (1/2W)
• Identical tolerance: ±10%
• Identical temperature coefficient: ±100ppm/°C
• Identical number of turns: 1.0
• Identical adjustment type: Side Adjustment
• Identical mounting type: Through Hole
• Identical termination style: PC Pins

The primary difference is the resistive material composition (Cermet vs. Ceramic) and physical dimensions, which do not affect electrical performance within the specified parameters. The 3362S series represents the current active production alternative from Bourns Inc. for this electrical specification.

Parameter Comparison

Engineering Selection Recommendations

The 3362S-1-205LF is the appropriate substitute for the PVC6E205A01B00 based on the following factors:

• All critical electrical parameters are identical, ensuring functional equivalence in circuit applications
• The 3362S-1-205LF maintains active production status, providing reliable long-term availability
• ROHS3 compliance of the substitute part aligns with current regulatory requirements, whereas the original part is non-compliant
• Slightly smaller physical dimensions of the 3362S-1-205LF may require PCB layout verification to confirm mechanical fit within existing designs
• Both parts are manufactured by Bourns Inc., ensuring consistent quality and performance standards

Frequently Asked Questions (FAQ)

Q: Can the 3362S-1-205LF be used as a direct replacement for the PVC6E205A01B00?

A: Yes. All electrical parameters—resistance, power rating, tolerance, temperature coefficient, number of turns, adjustment type, and termination style—are identical. PCB layout verification is required due to minor dimensional differences.

Q: What is the difference between Ceramic and Cermet resistive materials in this application?

A: Both materials meet the specified electrical parameters (2 MOhms, ±10% tolerance, ±100ppm/°C). Cermet material in the 3362S series provides improved stability and reliability in modern production environments.

Q: Why is the PVC6E205A01B00 listed as obsolete?

A: The PVC6 series has been discontinued by Bourns Inc. in favor of the 3362S series, which offers active production support, improved compliance status, and enhanced performance characteristics.

Q: Are there any compliance differences between these parts?

A: Yes. The 3362S-1-205LF is ROHS3 compliant and REACH affected, while the PVC6E205A01B00 is RoHS non-compliant and REACH unaffected. For new designs, the 3362S-1-205LF is the recommended choice.

Q: What packaging is available for the substitute part?

A: The 3362S-1-205LF is supplied in Tube packaging, whereas the original part packaging specification was not provided.