PVC6E201A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E201A01B00 is a 200 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitutes necessary for ongoing production and maintenance applications. The primary driver for substitution is product discontinuation, requiring selection of functionally equivalent active alternatives.

Substiute Parts

PVC6E201A01B00

Bourns Inc.In Stock: 941PVC6E201A01B00 Datasheet

Current PartRFQ

3362S-1-201LF

Bourns Inc.In Stock: 19513362S-1-201LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6E201A01B00 is determined by matching the following critical parameters:

• Resistance value: 200 Ohms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1.0 Turn
• Adjustment type: Side Adjustment
• Mounting type: Through Hole
• Termination style: PC Pins

The 3362S-1-201LF meets all substitution criteria. While the resistive material differs (Cermet vs. Ceramic), both materials satisfy the electrical performance requirements within the specified tolerance and temperature coefficient ranges. The physical dimensions are comparable, and both employ identical electrical interfaces and adjustment mechanisms.

Parameter Comparison

Engineering Selection Recommendations

The 3362S-1-201LF is the direct substitute for the PVC6E201A01B00. Selection is based on the following factors:

• All critical electrical parameters match exactly: resistance, power rating, tolerance, and temperature coefficient
• Functional equivalence is maintained across adjustment mechanism, mounting configuration, and termination style
• The substitute part is in active production status, ensuring long-term availability and supply chain continuity
• The 3362S-1-201LF achieves ROHS3 compliance, addressing regulatory requirements that the obsolete PVC6E201A01B00 does not meet
• Both parts are manufactured by the same supplier, ensuring consistent quality and performance standards

The material difference (Cermet vs. Ceramic) does not impact electrical performance within the specified operating parameters and tolerances.

Frequently Asked Questions (FAQ)

Q: Can the 3362S-1-201LF be used as a direct replacement for the PVC6E201A01B00?

A: Yes. Both parts share identical electrical specifications (200 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient), adjustment type (side adjustment), mounting configuration (through-hole PC pins), and number of turns (1.0). The parts are functionally equivalent.

Q: What is the difference between Ceramic and Cermet resistive materials in this application?

A: Both materials meet the specified tolerance and temperature coefficient requirements. Cermet (ceramic-metal composite) offers improved stability and reliability in sealed designs. The 3362S series employs sealed construction, which is an enhancement over the PVC6E design.

Q: Are there packaging differences between these parts?

A: The PVC6E201A01B00 is packaged in standard format, while the 3362S-1-201LF is supplied in Tube packaging. Both are suitable for through-hole PCB assembly processes.

Q: Does the 3362S-1-201LF meet current regulatory requirements?

A: Yes. The 3362S-1-201LF is ROHS3 compliant and REACH affected, meeting current environmental and regulatory standards. The obsolete PVC6E201A01B00 does not meet these requirements.

Q: Are the physical dimensions compatible with existing PCB layouts?

A: The PVC6E201A01B00 has a face dimension of 0.315" x 0.272" (8.00mm x 6.90mm), while the 3362S-1-201LF measures 0.275" x 0.260" (6.99mm x 6.60mm). Both are rectangular through-hole packages with side adjustment. Verify PCB footprint clearance for your specific application, as the substitute is slightly smaller.