PVC6E103C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E103C01B00 is a 10 kOhms 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making equivalent substitute parts necessary for ongoing production and maintenance applications. Active alternatives with compatible electrical and mechanical specifications are available from Bourns Inc. and TT Electronics/BI Technologies.

Substiute Parts

PVC6E103C01B00

Bourns Inc.In Stock: 835PVC6E103C01B00 Datasheet

Current PartRFQ

3362S-1-103LF

Bourns Inc.In Stock: 26043362S-1-103LF Datasheet

DirectRFQ

25SR10KLF

TT Electronics/BIIn Stock: 759725SR10KLF Datasheet

SimilarRFQ

72XR10KLF

TT Electronics / BI TechnologiesIn Stock: 371872XR10KLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by matching the following critical parameters: resistance value (10 kOhms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1.0), adjustment type (side adjustment), mounting type (through hole), and termination style (PC pins). All substitute parts listed meet these core electrical and mechanical requirements.

The primary distinction among substitutes is the resistive material composition and physical dimensions. The main part uses ceramic material, while all listed substitutes employ cermet material. Cermet construction provides improved performance characteristics while maintaining functional equivalence for the specified electrical parameters. Physical size variations exist across the substitute options, requiring verification of PCB layout compatibility during component selection.

Parameter Comparison

Engineering Selection Recommendations

3362S-1-103LF (Bourns Inc., Active) is the direct equivalent substitute from the original manufacturer. This part maintains Bourns manufacturing standards with ROHS3 compliance and sealed construction. The cermet resistive element provides enhanced stability compared to ceramic material. Physical dimensions are slightly smaller than the original part. REACH Affected status requires compliance verification for applications subject to REACH regulations.

25SR10KLF (TT Electronics/BI, Active) offers an alternative from a qualified secondary manufacturer with RoHS compliance and REACH Unaffected status. The square footprint (6.86mm x 6.86mm) differs from the original rectangular geometry, requiring PCB layout assessment. This option provides broad regulatory compliance for unrestricted applications.

72XR10KLF (TT Electronics/BI Technologies, Active) provides a larger square footprint option (9.53mm x 9.53mm) with ROHS3 compliance and REACH Unaffected status. The increased physical size may require PCB redesign considerations but offers alternative mounting flexibility. This part is supplied in bulk packaging.

All three substitutes maintain electrical equivalence across resistance, power rating, tolerance, temperature coefficient, and functional specifications. Selection should prioritize PCB layout compatibility, regulatory compliance requirements, and packaging format needs.

Frequently Asked Questions (FAQ)

Q: Can 3362S-1-103LF directly replace PVC6E103C01B00 without PCB modification?

A: Electrical substitution is direct. Physical dimensions differ slightly (0.275" x 0.260" versus 0.315" x 0.272"), requiring verification that the smaller footprint accommodates existing PCB hole spacing and component clearances.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers?

A: Both materials meet the specified electrical parameters (10 kOhms, ±10% tolerance, ±100ppm/°C). Cermet construction, used in all substitute parts, provides improved performance characteristics and is standard in active production lines.

Q: Are there regulatory compliance differences between the substitutes?

A: 3362S-1-103LF carries REACH Affected status, requiring compliance verification for applications subject to REACH regulations. Both 25SR10KLF and 72XR10KLF are REACH Unaffected. All three parts are RoHS compliant.

Q: Which substitute has the closest physical dimensions to the original part?

A: 3362S-1-103LF (0.275" x 0.260" rectangular) is closest to the original PVC6E103C01B00 (0.315" x 0.272" rectangular). Both maintain rectangular geometry and similar proportions.

Q: What packaging formats are available for these substitutes?

A: 3362S-1-103LF is supplied in tube packaging. 25SR10KLF is supplied in tube packaging. 72XR10KLF is supplied in bulk packaging. Packaging selection depends on production volume and handling requirements.

Q: Can 25SR10KLF or 72XR10KLF be used if PCB layout cannot accommodate the original rectangular footprint?

A: Yes. Both parts provide square footprints (6.86mm and 9.53mm respectively) as alternatives. PCB hole spacing and component clearance must be verified for each option.