PVC6E102C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E102C01B00 is a 1 kOhms, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity and ensure component availability for production and repair applications.

Key Parameters

Parameter	Value
Resistance	1 kOhms
Power Rating	0.5W (1/2W)
Tolerance	±10%
Temperature Coefficient	±100ppm/°C
Number of Turns	1.0
Adjustment Type	Side Adjustment
Mounting Type	Through Hole
Termination Style	PC Pins
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution for the PVC6E102C01B00 is determined by the following critical parameters: resistance value (1 kOhms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1.0), adjustment type (side adjustment), mounting type (through hole), and termination style (PC pins).

Parts are grouped into two categories:

Direct Substitutes (Identical Electrical & Mechanical Parameters): Parts that match all critical parameters and maintain functional equivalence with minimal design impact.

Similar Substitutes (Matching Electrical Parameters with Minor Mechanical Variations): Parts that satisfy all electrical requirements but may have different physical dimensions or resistive material composition (ceramic vs. cermet).

Parameter Comparison

Part Number	Manufacturer	Resistance	Power (W)	Tolerance	Temp Coeff	Turns	Adjustment	Material	Size (mm)	Status	RoHS
PVC6E102C01B00	Bourns Inc.	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Ceramic	8.00 x 6.90	Obsolete	ROHS3
3362S-1-102LF	Bourns Inc.	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Cermet	6.99 x 6.60	Active	ROHS3
3362W-1-102LF	Bourns Inc.	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Cermet	6.99 x 6.60	Active	ROHS3
72XR1KLF	TT Electronics/BI	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Cermet	9.53 x 9.53	Active	ROHS3
CT-6ES102	Nidec Components	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Cermet	8.20 x 7.00	Active	ROHS3
RJ-6S102	Nidec Components	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Cermet	7.00 x 6.60	Active	ROHS3
RJ-6X102	Nidec Components	1 kOhms	0.5	±10%	±100ppm/°C	1.0	Side	Cermet	7.00 x 6.60	Active	ROHS3

Engineering Selection Recommendations

All listed substitute parts are ROHS3 compliant and maintain electrical equivalence to the PVC6E102C01B00. Selection should be based on the following criteria:

Primary Recommendation: 3362S-1-102LF or 3362W-1-102LF (Bourns Inc., Active Status). Both parts are manufactured by the original equipment supplier, are currently in active production, and provide direct functional replacement with cermet resistive material. These parts are preferred for new designs and production continuity.

Secondary Recommendations: CT-6ES102, RJ-6S102, and RJ-6X102 (Nidec Components Corporation, Active Status). These parts satisfy all electrical parameters and are suitable for applications where board space and mechanical fit accommodate the specified dimensions.

Alternative Recommendation: 72XR1KLF (TT Electronics/BI, Active Status). This part meets all electrical requirements but has a larger footprint (9.53mm x 9.53mm square) and should be selected only when PCB layout permits the increased size.

All substitute parts are ROHS3 compliant. Cermet resistive material used in substitute parts provides improved stability and reliability compared to ceramic material in the original part.

Frequently Asked Questions (FAQ)

Q: Can 3362S-1-102LF directly replace PVC6E102C01B00 in existing designs? A: Yes. Both parts share identical electrical specifications (1 kOhms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn, side adjustment, PC pin termination). Physical dimensions differ slightly (6.99mm x 6.60mm vs. 8.00mm x 6.90mm), requiring PCB layout verification.

Q: What is the difference between ceramic and cermet resistive materials in these parts? A: Both materials meet the specified electrical parameters. Cermet material, used in substitute parts, generally provides improved temperature stability and longer operational life. The original PVC6E102C01B00 uses ceramic material.

Q: Are all substitute parts suitable for high-temperature applications? A: All parts maintain the specified temperature coefficient of ±100ppm/°C across the operating range. Specific temperature limits depend on individual part datasheets and should be consulted for applications exceeding standard industrial temperature ranges.

Q: What packaging options are available for substitute parts? A: 3362S-1-102LF and 3362W-1-102LF are supplied in tube packaging. 72XR1KLF, CT-6ES102, RJ-6S102, and RJ-6X102 are supplied in bulk packaging. Packaging selection may affect minimum order quantities and lead times.

Q: Is the PVC6E102C01B00 still available for purchase? A: The PVC6E102C01B00 is classified as obsolete. Current inventory of 704 pieces is available, but long-term availability is not guaranteed. Migration to active substitute parts is recommended for ongoing production requirements.

Q: Do all substitute parts meet ROHS3 compliance? A: Yes. All listed substitute parts are ROHS3 compliant, matching the compliance status of the original PVC6E102C01B00.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message