PVC6E101C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E101C01B00 is a 100 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This component is classified as obsolete, making substitute parts necessary for new designs and ongoing production requirements. The part operates with ±10% tolerance and ±100ppm/°C temperature coefficient across a single turn adjustment range.

Substiute Parts

PVC6E101C01B00

Bourns Inc.In Stock: 1152PVC6E101C01B00 Datasheet

Current PartRFQ

3362S-1-101LF

Bourns Inc.In Stock: 46163362S-1-101LF Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6E101C01B00 is determined by electrical and mechanical compatibility across the following critical parameters:

• Resistance value: 100 Ohms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Adjustment type: Side adjustment (mechanical compatibility)
• Mounting configuration: Through-hole with PC pin termination
• Physical form factor: Rectangular package suitable for PCB layout constraints

The 3362S-1-101LF qualifies as a direct substitute based on matching all electrical specifications and mechanical interface requirements, despite differences in resistive material composition and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

The 3362S-1-101LF is the qualified substitute for the obsolete PVC6E101C01B00. Both components are manufactured by Bourns Inc. and maintain identical electrical performance specifications across resistance, power rating, tolerance, and temperature coefficient parameters.

The 3362S-1-101LF offers the advantage of active product status with current manufacturing support and availability. The component is ROHS3 compliant and maintains full electrical compatibility with the original design.

Physical dimensions differ slightly between the two parts. The 3362S-1-101LF features a smaller rectangular footprint (6.99mm x 6.60mm versus 8.00mm x 6.90mm), which may require PCB layout verification to confirm fit within existing mounting holes and clearance constraints. Both parts utilize identical PC pin termination and side adjustment mechanisms, ensuring mechanical interface compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 3362S-1-101LF be used as a direct replacement for the PVC6E101C01B00?

A: Yes. Both components share identical electrical specifications: 100 Ohm resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn adjustment, side adjustment mechanism, and PC pin termination. Physical dimensions differ slightly; verify PCB layout compatibility before implementation.

Q: What is the primary difference between these two parts?

A: The resistive material differs: PVC6E101C01B00 uses ceramic material, while 3362S-1-101LF uses cermet material. Both materials deliver equivalent electrical performance within the specified tolerance and temperature coefficient ranges. The 3362S-1-101LF is an active product with current manufacturing support, whereas the PVC6E101C01B00 is obsolete.

Q: Are there packaging differences between these parts?

A: The PVC6E101C01B00 is supplied in standard packaging, while the 3362S-1-101LF is packaged in tubes. Both are through-hole components with PC pin termination suitable for PCB assembly processes.

Q: Does the smaller physical size of the 3362S-1-101LF affect circuit performance?

A: No. Physical size does not affect electrical performance. Both components operate identically within specified electrical parameters. Size differences may impact PCB layout and mounting hole spacing; verify mechanical fit within your application before design release.

Q: Are both parts RoHS compliant?

A: Yes. Both the PVC6E101C01B00 and 3362S-1-101LF are ROHS3 compliant, meeting environmental and regulatory requirements for electronic component manufacturing and use.