PVC6E100A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6E100A01B00 is a 10 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, side adjustment, and PC pin termination. This part is classified as obsolete, making identification of suitable substitutes necessary for ongoing design support and procurement planning. The primary driver for substitution is product discontinuation, requiring engineers to identify functionally equivalent alternatives that maintain electrical and mechanical compatibility within system designs.

Substiute Parts

PVC6E100A01B00

Bourns Inc.In Stock: 1223PVC6E100A01B00 Datasheet

Current PartRFQ

3362S-1-100LF

Bourns Inc.In Stock: 10853362S-1-100LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PVC6E100A01B00 is based on matching the following critical parameters:

• Resistance value: 10 Ohms (exact match required)
• Power rating: 0.5W minimum
• Tolerance: ±10% or better
• Temperature coefficient: ±100ppm/°C or better
• Number of turns: 1.0 Turn
• Adjustment type: Side Adjustment
• Mounting type: Through Hole
• Termination style: PC Pins

The 3362S-1-100LF meets all these criteria. While the resistive material differs (Cermet vs. Ceramic) and physical dimensions are slightly smaller, these variations remain within acceptable substitution parameters for this product category. The Cermet material in the substitute provides equivalent electrical performance and improved environmental stability compared to ceramic.

Parameter Comparison

Engineering Selection Recommendations

The 3362S-1-100LF is the qualified substitute for the obsolete PVC6E100A01B00. Selection is based on:

• Electrical parameter equivalence across all critical specifications
• Active product status ensuring long-term availability and supply chain continuity
• ROHS3 compliance, addressing regulatory requirements for new designs
• Identical core functionality with side-adjustment trimmer potentiometer operation
• Slightly reduced physical footprint (6.99mm x 6.60mm vs. 8.00mm x 6.90mm), which may require PCB layout verification for existing designs

The substitute maintains full electrical compatibility while providing improved environmental compliance and manufacturing support.

Frequently Asked Questions (FAQ)

Q: Can the 3362S-1-100LF be used as a direct replacement in existing PCB designs?

A: Electrical compatibility is confirmed. Physical dimensions are slightly smaller (6.99mm x 6.60mm vs. 8.00mm x 6.90mm). PCB layout verification is necessary to confirm adequate clearance and mounting hole alignment.

Q: What is the difference between Ceramic and Cermet resistive materials?

A: Both materials meet the specified electrical parameters (10 Ohms, ±10% tolerance, ±100ppm/°C). Cermet material in the 3362S series provides enhanced environmental stability and is the current manufacturing standard for Bourns trimmer potentiometers.

Q: Is the 3362S-1-100LF RoHS compliant?

A: Yes, the 3362S-1-100LF is ROHS3 compliant. The original PVC6E100A01B00 is non-compliant. This compliance difference is significant for new designs subject to RoHS regulations.

Q: Are there inventory considerations between these parts?

A: The PVC6E100A01B00 has 1158 pieces in stock (obsolete status). The 3362S-1-100LF has 1046 pieces in stock and is an active product with ongoing manufacturing support.

Q: What packaging is available for the substitute?

A: The 3362S-1-100LF is supplied in Tube packaging, standard for active Bourns trimmer potentiometer products.