PVC6D500A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6D500A01B00 is a 50 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, 1.0 turn top adjustment, and PC pin termination. This part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. Substitute parts must maintain identical electrical specifications (50 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient) and mechanical compatibility (through-hole mounting, PC pins, top adjustment, 1.0 turn).

Substiute Parts

PVC6D500A01B00

Bourns Inc.In Stock: 900PVC6D500A01B00 Datasheet

Current PartRFQ

3362R-1-500LF

Bourns Inc.In Stock: 11733362R-1-500LF Datasheet

DirectRFQ

3329H-1-500LF

Bourns Inc.In Stock: 14173329H-1-500LF Datasheet

SimilarRFQ

FT-63ETP500

Nidec Components CorporationIn Stock: 1038FT-63ETP500 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PVC6D500A01B00 is determined by strict equivalence across the following parameters: resistance value (50 Ohms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1.0), adjustment type (top adjustment), mounting type (through hole), and termination style (PC pins).

The three substitute parts listed below meet all electrical and mechanical requirements. Differences in resistive material (ceramic vs. cermet), physical dimensions, and product status are noted but do not prevent functional substitution when these core parameters are maintained.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts satisfy the core electrical and mechanical requirements for direct replacement of the PVC6D500A01B00. Selection should prioritize active product status and regulatory compliance.

3362R-1-500LF and 3329H-1-500LF are both Bourns Inc. products with active status and ROHS3 compliance. The 3362R-1-500LF features rectangular geometry (0.275" x 0.260" face), while the 3329H-1-500LF features round geometry (0.250" diameter). Both are packaged in tubes.

FT-63ETP500 is manufactured by Nidec Components Corporation with active status and ROHS3 compliance. It features square geometry (0.276" x 0.276" face) and is packaged in tape and box format. This part maintains unlimited moisture sensitivity level (MSL 1), matching the original PVC6D500A01B00.

Selection among these three parts should be based on available inventory, packaging requirements, physical form factor compatibility with the PCB layout, and supplier availability.

Frequently Asked Questions (FAQ)

Q: Can the 3362R-1-500LF directly replace the PVC6D500A01B00?

A: Yes. Both parts share identical electrical specifications (50 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn, top adjustment) and mechanical compatibility (through-hole mounting, PC pins). The primary difference is resistive material (cermet vs. ceramic) and physical dimensions. The rectangular form factor of the 3362R-1-500LF (0.275" x 0.260" face) differs from the square form factor of the PVC6D500A01B00 (0.272" x 0.272" face), requiring verification of PCB layout compatibility.

Q: What is the difference between the 3329H-1-500LF and 3362R-1-500LF?

A: Both are Bourns Trimpot® sealed trimmer potentiometers with identical electrical specifications. The primary difference is physical form factor: the 3329H-1-500LF is round (0.250" diameter), while the 3362R-1-500LF is rectangular (0.275" x 0.260" face). Selection depends on available PCB footprint space and mounting hole configuration.

Q: Is the FT-63ETP500 from Nidec Components Corporation compatible?

A: Yes. The FT-63ETP500 meets all electrical and mechanical requirements. It is manufactured by a different supplier (Nidec Components Corporation) and features square geometry (0.276" x 0.276" face). Packaging is tape and box format rather than tube. Verify supplier availability and lead times before selection.

Q: Why is the original PVC6D500A01B00 obsolete?

A: The PVC6D500A01B00 is classified as obsolete by the manufacturer. All three substitute parts are active products with current manufacturing support and regulatory compliance (ROHS3). Use of active substitute parts ensures long-term availability and compliance with current environmental regulations.

Q: Are there differences in RoHS compliance between these parts?

A: The original PVC6D500A01B00 is RoHS non-compliant. All three substitute parts (3362R-1-500LF, 3329H-1-500LF, and FT-63ETP500) are ROHS3 compliant, meeting current environmental standards for electronic components.

Q: What packaging options are available?

A: The 3362R-1-500LF and 3329H-1-500LF are supplied in tube packaging. The FT-63ETP500 is supplied in tape and box format. Packaging selection may affect handling, storage, and automated assembly compatibility.