PVC6D205C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6D205C01B00 is a 2 MOhm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. in the PVC6 series. This component features ceramic resistive material, top adjustment, and PC pin termination for PCB mounting applications. The part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. Substitute parts must maintain identical electrical specifications while accommodating potential differences in resistive material composition and physical dimensions within acceptable tolerance ranges.

Substiute Parts

PVC6D205C01B00

Bourns Inc.In Stock: 1126PVC6D205C01B00 Datasheet

Current PartRFQ

3362R-1-205LF

Bourns Inc.In Stock: 14273362R-1-205LF Datasheet

DirectRFQ

CT-6EP205

Nidec Components CorporationIn Stock: 4646CT-6EP205 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6D205C01B00 is determined by strict equivalence across the following parameters: resistance value (2 MOhms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1.0), adjustment type (top adjustment), mounting type (through hole), and termination style (PC pins). All substitute parts must meet or exceed RoHS3 compliance. Physical dimensions and resistive material composition (ceramic or cermet) may vary within the constraints of PCB layout and circuit performance requirements. Moisture sensitivity level and REACH compliance status are secondary considerations based on application environment and regulatory jurisdiction.

Parameter Comparison

Engineering Selection Recommendations

Both 3362R-1-205LF and CT-6EP205 are functionally equivalent substitutes for the obsolete PVC6D205C01B00 based on electrical parameter matching. The 3362R-1-205LF is a direct Bourns Inc. replacement within the active Trimpot® 3362 series, offering continuity with the original manufacturer. The CT-6EP205 from Nidec Components Corporation provides an alternative from an established supplier with equivalent electrical performance and RoHS3 compliance. Selection between these substitutes should be based on supply chain availability, packaging requirements (tube versus bulk), and application-specific compliance needs. The 3362R-1-205LF carries REACH Affected status, while the CT-6EP205 is REACH Unaffected. Physical dimension variations are minimal and should be evaluated against specific PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Can the 3362R-1-205LF directly replace the PVC6D205C01B00 in existing designs? A: Yes. The 3362R-1-205LF maintains all critical electrical parameters: 2 MOhm resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn adjustment, and PC pin through-hole termination. Physical dimensions differ slightly (0.275" x 0.260" versus 0.272" x 0.272"), requiring PCB layout verification.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers? A: Both materials are specified in the provided data. The original PVC6D205C01B00 uses ceramic material, while both substitutes employ cermet. Material differences do not affect the specified electrical parameters for this application.

Q: Is the CT-6EP205 suitable for applications requiring REACH compliance? A: The CT-6EP205 is REACH Unaffected, making it suitable for applications in jurisdictions with REACH requirements. The 3362R-1-205LF is REACH Affected and may require additional documentation for certain applications.

Q: How do packaging differences affect part selection? A: The 3362R-1-205LF is supplied in tube packaging, while the CT-6EP205 is supplied in bulk. Packaging choice depends on production volume, handling requirements, and inventory management practices.

Q: Are there dimensional constraints for PCB mounting? A: All three parts are through-hole mounted with PC pins. Face dimensions range from 6.90mm to 7.00mm, representing less than 2% variation. PCB hole spacing and layout must accommodate the specific part selected.