PVC6D205A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6D205A01B00 is a 2 MOhm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. in the PVC6 series. This component features ceramic resistive material, top adjustment, and PC pin termination for applications requiring precision resistance adjustment in compact form factors.

The PVC6D205A01B00 is classified as obsolete. Equivalent and substitute parts are available from active product lines that maintain the same electrical specifications and mechanical compatibility, enabling continued system support and new design implementations.

Substiute Parts

PVC6D205A01B00

Bourns Inc.In Stock: 894PVC6D205A01B00 Datasheet

Current PartRFQ

3362R-1-205LF

Bourns Inc.In Stock: 14273362R-1-205LF Datasheet

DirectRFQ

CT-6EP205

Nidec Components CorporationIn Stock: 4646CT-6EP205 Datasheet

SimilarRFQ

FT-63ETP205

Nidec Components CorporationIn Stock: 863FT-63ETP205 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PVC6D205A01B00 is determined by strict equivalence across the following parameters:

• Resistance value: 2 MOhms
• Power rating: 0.5W (1/2W)
• Tolerance: ±10%
• Temperature coefficient: ±100ppm/°C
• Number of turns: 1.0
• Adjustment type: Top Adjustment
• Mounting type: Through Hole
• Termination style: PC Pins

All substitute parts listed maintain these electrical and mechanical specifications. Differences in resistive material (ceramic versus cermet), physical dimensions within tolerance, and product status do not affect functional equivalence for applications designed around the PVC6D205A01B00 specifications.

Parameter Comparison

Engineering Selection Recommendations

3362R-1-205LF is the primary direct substitute from Bourns Inc., maintaining manufacturer continuity while transitioning from the obsolete PVC6D series to the active Trimpot® 3362 - Sealed series. This part is ROHS3 compliant and REACH affected, suitable for new designs and legacy system support requiring regulatory compliance.

CT-6EP205 and FT-63ETP205 are functionally equivalent alternatives from Nidec Components Corporation. Both are ROHS3 compliant and REACH unaffected. CT-6EP205 is supplied in bulk packaging, while FT-63ETP205 is supplied in tape and box format. Both maintain identical electrical specifications and through-hole PC pin termination.

Selection between substitute parts should be based on supply chain availability, packaging requirements, and compliance certifications applicable to the end application. All three substitutes provide equivalent electrical performance for circuits designed around the PVC6D205A01B00 specifications.

Frequently Asked Questions (FAQ)

Q: Can 3362R-1-205LF directly replace PVC6D205A01B00 in existing PCB designs?

A: Yes. Both parts maintain identical electrical specifications (2 MOhms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient, 1.0 turn, top adjustment) and through-hole PC pin termination. Physical dimensions differ slightly (rectangular 0.275" x 0.260" versus square 0.272" x 0.272"), requiring verification of PCB layout clearances.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers?

A: The PVC6D205A01B00 uses ceramic material, while 3362R-1-205LF, CT-6EP205, and FT-63ETP205 use cermet material. Both materials meet the specified electrical parameters. Cermet construction in the substitute parts contributes to sealed design and improved environmental performance.

Q: Are all substitute parts RoHS compliant?

A: 3362R-1-205LF, CT-6EP205, and FT-63ETP205 are all ROHS3 compliant. The original PVC6D205A01B00 is RoHS non-compliant. Compliance requirements should be verified against end-application regulatory standards.

Q: What packaging options are available for these substitutes?

A: 3362R-1-205LF is supplied in tube packaging. CT-6EP205 is supplied in bulk. FT-63ETP205 is supplied in tape and box format. Packaging selection should align with assembly process requirements and inventory management practices.

Q: Do all substitute parts have the same physical footprint?

A: No. PVC6D205A01B00 has a square face of 0.272" x 0.272" (6.90mm x 6.90mm). 3362R-1-205LF has a rectangular face of 0.275" x 0.260" (6.99mm x 6.60mm). CT-6EP205 and FT-63ETP205 have square faces of 0.276" x 0.276" (7.00mm x 7.00mm). PCB layout verification is required before substitution.