PVC6A202A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6A202A01B00 is a 2 kOhms 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with ceramic resistive material, 1 turn top adjustment, and PC pin termination. This part is classified as obsolete, making equivalent substitutes necessary for new designs and ongoing production requirements. Active alternative models from both Bourns and TT Electronics/BI provide functional equivalence while offering improved availability and compliance status.

Substiute Parts

PVC6A202A01B00

Bourns Inc.In Stock: 1017PVC6A202A01B00 Datasheet

Current PartRFQ

3362P-1-202LF

Bourns Inc.In Stock: 304793362P-1-202LF Datasheet

SimilarRFQ

25PR2KLF

TT Electronics/BIIn Stock: 560825PR2KLF Datasheet

SimilarRFQ

72PMR2KLF

TT Electronics/BIIn Stock: 97872PMR2KLF Datasheet

SimilarRFQ

72PR2KLF

TT Electronics/BIIn Stock: 142172PR2KLF Datasheet

SimilarRFQ

82PR2KLF

TT Electronics / BI TechnologiesIn Stock: 209082PR2KLF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following parameters: resistance value (2 kOhms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), number of turns (1), adjustment type (top adjustment), mounting type (through hole), and termination style (PC pins). All listed substitute parts meet these core electrical and mechanical requirements. Variations in resistive material (ceramic vs. cermet), physical dimensions, and packaging format do not affect functional substitutability within the specified parameter set. Product status and compliance certifications are secondary considerations for component selection.

Parameter Comparison

Engineering Selection Recommendations

The PVC6A202A01B00 is obsolete and no longer in active production. All substitute parts listed maintain electrical and mechanical equivalence across the specified parameter set.

For new designs and production applications, 3362P-1-202LF is the primary recommendation. This Bourns part is active, ROHS3 compliant, and REACH affected. It provides direct functional equivalence with improved regulatory compliance and current manufacturing support.

For applications requiring alternative manufacturers, the TT Electronics/BI series (25PR2KLF, 72PMR2KLF, 72PR2KLF, 82PR2KLF) are all active and ROHS3 compliant. These parts differ in physical dimensions and packaging formats but maintain full electrical equivalence. Selection among these alternatives should be based on PCB layout constraints and available inventory.

Frequently Asked Questions (FAQ)

Q: Can PVC6A202A01B00 be directly replaced with 3362P-1-202LF? A: Yes. Both parts share identical electrical specifications: 2 kOhms resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 1 turn adjustment, and PC pin termination. The primary difference is resistive material (ceramic vs. cermet) and improved compliance status of the 3362P-1-202LF.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers? A: Both materials meet the specified electrical parameters. Cermet (ceramic-metal composite) is used in the active substitute parts and provides equivalent performance within the stated tolerance and temperature coefficient ranges.

Q: Are there physical dimension differences between substitute parts? A: Yes. The PVC6A202A01B00 has a 0.272" x 0.272" square face. Substitutes vary: 3362P-1-202LF is 0.275" x 0.260" rectangular, 25PR2KLF is 0.270" x 0.270" square, 72PMR2KLF and 72PR2KLF are 0.375" x 0.375" square, and 82PR2KLF is 0.250" diameter round. PCB layout must accommodate the selected substitute's physical footprint.

Q: What is the compliance difference between the obsolete part and active substitutes? A: The PVC6A202A01B00 is RoHS non-compliant. Active substitutes are ROHS3 compliant. For new designs subject to RoHS regulations, active substitutes are required.

Q: Can I use 72PMR2KLF or 72PR2KLF in a design originally specified for PVC6A202A01B00? A: Electrical equivalence is maintained. However, these parts have significantly larger physical dimensions (0.375" x 0.375" vs. 0.272" x 0.272"). PCB layout compatibility must be verified before substitution.