PVC6A200A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6A200A01B00 is a 20 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. as part of the PVC6 series. This component features ceramic resistive material, PC pin termination, and top adjustment with a single turn. The product is currently obsolete, making equivalent substitutes necessary for ongoing applications and new designs requiring this electrical specification.

Substiute Parts

PVC6A200A01B00

Bourns Inc.In Stock: 1100PVC6A200A01B00 Datasheet

Current PartRFQ

3362P-1-200LF

Bourns Inc.In Stock: 253093362P-1-200LF Datasheet

DirectRFQ

3329H-1-200LF

Bourns Inc.In Stock: 12603329H-1-200LF Datasheet

SimilarRFQ

FT-63ETP200

Nidec Components CorporationIn Stock: 945FT-63ETP200 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PVC6A200A01B00 is determined by strict electrical and mechanical compatibility across the following parameters: resistance value (20 Ohms), power rating (0.5W), tolerance (±10%), number of turns (1), adjustment type (top adjustment), mounting type (through hole), and termination style (PC pins).

The substitute parts identified maintain these core electrical specifications. Variations in resistive material (ceramic to cermet), physical dimensions, and temperature coefficient are secondary considerations that do not prevent functional substitution when the primary electrical parameters align.

Two direct substitutes from Bourns Inc. are available: the 3362P-1-200LF (Trimpot® 3362 series, cermet material, rectangular form factor) and the 3329H-1-200LF (Trimpot® 3329 series, cermet material, round form factor). An alternative from Nidec Components Corporation, the FT-63ETP200 (FT-63 series, cermet material, square form factor), also meets the electrical requirements.

Parameter Comparison

Engineering Selection Recommendations

The 3362P-1-200LF is the primary direct substitute from Bourns Inc., offering active product status, ROHS3 compliance, and REACH affected designation. This part maintains electrical equivalence with improved regulatory compliance compared to the obsolete PVC6A200A01B00.

The 3329H-1-200LF provides an alternative Bourns solution with identical electrical specifications and active status. This option differs in physical form factor (round versus square) and should be selected based on PCB layout constraints.

The FT-63ETP200 from Nidec Components Corporation is a cross-manufacturer substitute with active status and ROHS3 compliance. The temperature coefficient specification (±150ppm/°C) is slightly higher than the original part (±100ppm/°C), which may be relevant for temperature-sensitive applications. This part is suitable for applications where manufacturer diversity is required.

All three substitutes are electrically compatible with the original specification and support continued production for designs currently using the PVC6A200A01B00.

Frequently Asked Questions (FAQ)

Q: Can the 3362P-1-200LF directly replace the PVC6A200A01B00 on existing PCBs?

A: Yes. Both parts share identical electrical specifications (20 Ohms, 0.5W, ±10% tolerance, 1 turn, top adjustment, through-hole PC pins). Physical dimensions differ slightly (rectangular 0.275" x 0.260" versus square 0.272" x 0.272"), but standard PCB hole spacing accommodates both termination styles.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers?

A: Ceramic and cermet materials both function as resistive elements in trimmer potentiometers. The substitute parts use cermet material, which is standard in modern sealed trimmer designs. Both materials meet the specified electrical parameters for this application.

Q: Does the higher temperature coefficient of the FT-63ETP200 affect compatibility?

A: The FT-63ETP200 specifies ±150ppm/°C versus ±100ppm/°C for the original part. This difference is relevant only in applications with strict temperature stability requirements. For standard applications, both specifications are acceptable.

Q: Are all substitute parts RoHS compliant?

A: Yes. The 3362P-1-200LF, 3329H-1-200LF, and FT-63ETP200 are all ROHS3 compliant, whereas the original PVC6A200A01B00 is RoHS non-compliant. This compliance improvement supports modern manufacturing and regulatory requirements.

Q: What packaging options are available for these substitutes?

A: The 3362P-1-200LF and 3329H-1-200LF are supplied in Tube packaging. The FT-63ETP200 is supplied in Tape & Box (TB) packaging. Packaging selection depends on assembly process requirements and order quantities.