PVC6A101A01B00 Equivalent & Substitute Parts

Part Overview

The PVC6A101A01B00 is a 100 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. in the PVC6 series. This part features ceramic resistive material, PC pin termination, and top adjustment with a single turn. The product is currently obsolete, making equivalent substitutes necessary for ongoing design support and production requirements.

Substiute Parts

PVC6A101A01B00

Bourns Inc.In Stock: 1125PVC6A101A01B00 Datasheet

Current PartRFQ

3362P-1-101LF

Bourns Inc.In Stock: 657703362P-1-101LF Datasheet

SimilarRFQ

25PR100LF

TT Electronics/BIIn Stock: 83925PR100LF Datasheet

SimilarRFQ

72PR100LF

TT Electronics/BIIn Stock: 129072PR100LF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PVC6A101A01B00 is determined by matching the following critical parameters: 100 Ohm resistance value, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, single-turn adjustment, top adjustment type, through-hole mounting, and PC pin termination. The resistive material (ceramic or cermet) and physical dimensions represent secondary considerations that do not prevent functional substitution when all primary electrical parameters align. All identified substitutes meet these core requirements and are available in active production status.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts—3362P-1-101LF, 25PR100LF, and 72PR100LF—satisfy the electrical and mechanical requirements for direct replacement of the PVC6A101A01B00. The primary distinction among substitutes is regulatory compliance status.

The 3362P-1-101LF (Bourns Trimpot® 3362 series) and 72PR100LF (TT Electronics/BI series 72) both carry ROHS3 compliance, meeting current environmental regulations. The 25PR100LF (TT Electronics/BI series 25) provides RoHS compliance. For new designs or production requiring current regulatory alignment, either the 3362P-1-101LF or 72PR100LF is appropriate. The 25PR100LF remains suitable for applications where legacy RoHS compliance is acceptable.

Physical dimensions vary across substitutes: the 3362P-1-101LF measures 6.99mm x 6.60mm, the 25PR100LF measures 6.86mm x 6.86mm, and the 72PR100LF measures 9.53mm x 9.53mm. PCB layout constraints may influence selection based on available board space.

Frequently Asked Questions (FAQ)

Q: Can the 3362P-1-101LF replace the PVC6A101A01B00 in existing designs? A: Yes. The 3362P-1-101LF matches all critical electrical parameters: 100 Ohm resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, single-turn top adjustment, through-hole mounting, and PC pin termination. Physical dimensions differ slightly (6.99mm x 6.60mm versus 6.90mm x 6.90mm), requiring PCB layout verification.

Q: What is the difference between ceramic and cermet resistive materials in these trimmers? A: Both ceramic and cermet materials are used in precision trimmer potentiometers and meet the specified electrical parameters for this application. The choice between them does not affect functional substitution when all other parameters match.

Q: Are all substitutes available in the same packaging? A: No. The 3362P-1-101LF is supplied in tube packaging, the 25PR100LF in tube packaging, and the 72PR100LF in bulk packaging. Packaging selection depends on procurement and assembly requirements.

Q: Which substitute offers the best regulatory compliance for new production? A: Both the 3362P-1-101LF and 72PR100LF carry ROHS3 compliance, meeting current environmental standards. Either is suitable for new designs requiring current regulatory alignment.

Q: Does the larger physical size of the 72PR100LF affect electrical performance? A: No. The 72PR100LF (9.53mm x 9.53mm) delivers identical electrical performance to smaller alternatives. Size difference is a mechanical consideration relevant only to PCB layout constraints.