PVC6A100C01B00 Equivalent & Substitute Parts

Part Overview

The PVC6A100C01B00 is a 10 Ohm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. as part of the PVC6 series. This component features ceramic resistive material, PC pin termination, and top adjustment capability with a single turn. The product is currently obsolete, making equivalent substitutes necessary for ongoing applications and new designs requiring this specification.

Substiute Parts

PVC6A100C01B00

Bourns Inc.In Stock: 908PVC6A100C01B00 Datasheet

Current PartRFQ

3362P-1-100LF

Bourns Inc.In Stock: 87373362P-1-100LF Datasheet

DirectRFQ

FT-63ETP100

Nidec Components CorporationIn Stock: 925FT-63ETP100 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the PVC6A100C01B00 is determined by strict equivalence across the following parameters:

• Resistance value: 10 Ohms (exact match required)
• Power rating: 0.5W / 1/2W (exact match required)
• Tolerance: ±10% (exact match required)
• Number of turns: 1 (exact match required)
• Adjustment type: Top Adjustment (exact match required)
• Mounting type: Through Hole (exact match required)
• Termination style: PC Pins (exact match required)

Acceptable variations within substitution criteria:

• Resistive material: Ceramic or Cermet (both suitable for this application)
• Temperature coefficient: ±100ppm/°C to ±150ppm/°C (within acceptable thermal performance range)
• Face dimensions: Minor variations within ±0.010" acceptable for through-hole mounting compatibility
• Product status: Active products preferred for obsolete components

Parameter Comparison

Engineering Selection Recommendations

Both 3362P-1-100LF and FT-63ETP100 meet the core electrical and mechanical substitution criteria for the PVC6A100C01B00.

3362P-1-100LF (Bourns Inc. Trimpot® 3362 - Sealed): This direct substitute maintains identical electrical specifications including resistance, power rating, tolerance, and temperature coefficient. The component is active in production with ROHS3 compliance. The Cermet resistive material provides enhanced stability compared to ceramic. Packaging is supplied in tube format. REACH status is affected, requiring verification for applications subject to REACH regulations.

FT-63ETP100 (Nidec Components Corporation FT-63 Series): This substitute meets all core electrical requirements with a slightly elevated temperature coefficient of ±150ppm/°C versus the original ±100ppm/°C specification. The component is active in production with ROHS3 compliance and REACH unaffected status. Cermet resistive material is employed. Packaging is supplied in tape and box format. Face dimensions are marginally larger at 7.00mm x 7.00mm.

Both substitutes are suitable for applications where the PVC6A100C01B00 is no longer available. Selection between them depends on regulatory requirements (REACH compliance), packaging preferences, and thermal performance tolerance of the application.

Frequently Asked Questions (FAQ)

Q: Can the 3362P-1-100LF directly replace the PVC6A100C01B00 in existing designs?

A: Yes. The 3362P-1-100LF maintains identical electrical specifications (10 Ohms, 0.5W, ±10% tolerance, ±100ppm/°C) and mechanical compatibility (through-hole PC pins, top adjustment, single turn). Face dimensions vary by approximately 0.003" to 0.004", which is acceptable for through-hole PCB mounting. Verify REACH compliance requirements for your application.

Q: What is the difference between Ceramic and Cermet resistive materials in these trimmers?

A: Both materials are provided in the specifications. Ceramic material is used in the PVC6A100C01B00, while Cermet is used in both substitute parts. The choice between them is determined by the provided component specifications and does not affect substitution eligibility when all other parameters match.

Q: Are there packaging differences between the substitutes?

A: Yes. The 3362P-1-100LF is supplied in tube packaging, while the FT-63ETP100 is supplied in tape and box format. Select based on your procurement and assembly process requirements.

Q: Does the FT-63ETP100's higher temperature coefficient (±150ppm/°C) affect substitution suitability?

A: The FT-63ETP100 temperature coefficient of ±150ppm/°C is within acceptable variation for this product category and does not disqualify it as a substitute. Verify that your application's thermal performance requirements are met by this specification.

Q: What compliance certifications apply to these substitutes?

A: All three parts are ROHS3 compliant. The 3362P-1-100LF is REACH affected, while the PVC6A100C01B00 and FT-63ETP100 are REACH unaffected. Confirm compliance requirements for your specific application and regulatory jurisdiction.

Q: Are the PC pin terminations compatible across all three parts?

A: Yes. All three parts use PC pin termination style suitable for through-hole PCB mounting. Pin spacing and hole compatibility are maintained across the substitutes.