PVC2X282 Equivalent & Substitute Parts

Part Overview

The PVC2X282 is an 8200 pF film capacitor rated for 2000V DC operation with polypropylene dielectric and radial through-hole mounting. Manufactured by Cornell Dubilier Electronics (CDE), this component is classified as obsolete. Finding equivalent or substitute parts is necessary due to the discontinued status of the original manufacturer offering, requiring identification of functionally compatible alternatives that meet or exceed the original electrical and mechanical specifications.

Substiute Parts

PVC2X282

Cornell Dubilier Electronics (CDE)In Stock: 1059PVC2X282 Datasheet

Current PartRFQ

B32672L8822J000

EPCOS - TDK ElectronicsIn Stock: 45706B32672L8822J000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of PVC2X282 is determined by the following critical parameters:

• Capacitance Value: Exact match at 8200 pF
• Voltage Rating (DC): Minimum 2000V DC requirement
• Dielectric Material: Polypropylene (PP) composition
• Mounting Configuration: Through-hole radial mounting
• Temperature Range: Operating capability within -55°C to at least 105°C
• Compliance Standards: ROHS3 compliance and industrial certifications maintained

The substitute part B32672L8822J000 from EPCOS - TDK Electronics meets these core substitution criteria while offering improved tolerance (±5% versus ±10%) and enhanced operating temperature capability (up to 110°C).

Parameter Comparison

Engineering Selection Recommendations

The B32672L8822J000 substitute part is qualified for direct replacement based on the following criteria:

• Both parts maintain ROHS3 compliance, ensuring regulatory alignment with modern manufacturing and environmental standards
• Both components are REACH Unaffected, supporting international supply chain requirements
• The substitute part carries Active product status with documented inventory availability (45,626 pcs), whereas the original PVC2X282 is obsolete
• Electrical specifications are equivalent at the critical 8200 pF / 2000V DC rating
• The substitute part features improved tolerance (±5% vs. ±10%), providing superior capacitance accuracy in circuit applications
• Enhanced maximum operating temperature (110°C vs. 105°C) expands application range in higher ambient conditions

Frequently Asked Questions (FAQ)

Q: Can B32672L8822J000 directly replace PVC2X282 in my circuit?

A: Direct replacement is supported when the circuit design is compatible with the substitute part's physical dimensions and the improved ±5% tolerance specification. Both components meet the same 8200 pF / 2000V DC electrical requirement.

Q: What are the key differences between these parts?

A: The substitute part offers tighter tolerance (±5% vs. ±10%), higher AC voltage rating (700V vs. 500V), metallized dielectric construction, superior temperature range (-55°C to 110°C vs. -55°C to 105°C), and active manufacturer support versus obsolete status.

Q: Are physical dimensions compatible between PVC2X282 and B32672L8822J000?

A: Physical dimensions differ. PVC2X282 is 0.598" diameter × 1.252" length with 0.969" lead spacing. B32672L8822J000 is 0.709" length × 0.236" width with 0.591" lead spacing. PCB layout modification may be required.

Q: What compliance certifications apply to both parts?

A: Both components are ROHS3 compliant and REACH unaffected, meeting modern environmental and regulatory standards for industrial applications.

Q: Why is the substitute part metallized polypropylene rather than standard polypropylene?

A: Metallized polypropylene construction in the B32672L8822J000 supports the high-frequency and switching application profile, providing self-healing characteristics and improved pulse handling capability.