PV36Z253C01B00 Equivalent & Substitute Parts

Part Overview

The PV36Z253C01B00 is a 25 kOhm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with cermet resistive material, 25-turn side adjustment, and PC pin termination. This component is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set for this product category.

Substiute Parts

PV36Z253C01B00

Bourns Inc.In Stock: 895PV36Z253C01B00 Datasheet

Current PartRFQ

3296Z-1-253LF

Bourns Inc.In Stock: 12513296Z-1-253LF Datasheet

SimilarRFQ

PV36X503C01B00

Bourns Inc.In Stock: 2758PV36X503C01B00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PV36Z253C01B00 are grouped based on strict electrical and mechanical parameter matching. The critical parameters that determine substitution eligibility are: resistance value, power rating, tolerance, temperature coefficient, number of turns, adjustment type, resistive material, mounting type, and termination style.

Group 1: Direct Electrical & Mechanical Equivalents Parts matching all critical parameters including 25 kOhm resistance, 0.5W power rating, 25-turn side adjustment, cermet material, through-hole mounting, and PC pin termination.

Group 2: Same Series, Different Resistance Parts from the same PV36 series with identical mechanical and electrical specifications except resistance value, suitable for applications requiring different impedance levels within the same form factor.

Parameter Comparison

Engineering Selection Recommendations

3296Z-1-253LF: This part is a direct electrical equivalent with identical resistance (25 kOhms), power rating (0.5W), tolerance (±10%), temperature coefficient (±100ppm/°C), and all mechanical specifications. Both parts are Active status and ROHS3 compliant. Dimensional variation is minimal (0.395" x 0.190" versus 0.394" x 0.197"), and both use PC pin termination through-hole mounting. This substitute is suitable for direct replacement in applications where the PV36Z253C01B00 is specified.

PV36X503C01B00: This part shares the same series (PV36), mounting type, termination style, and all electrical parameters except resistance value (50 kOhms versus 25 kOhms). Both are Active status and ROHS3 compliant with identical dimensions. This substitute is applicable only in applications where 50 kOhm impedance is acceptable or required, and the circuit design permits the higher resistance value.

Frequently Asked Questions (FAQ)

Q: Can the 3296Z-1-253LF replace the PV36Z253C01B00 in all applications? A: Yes. The 3296Z-1-253LF maintains all critical electrical parameters (25 kOhms, 0.5W, ±10% tolerance, ±100ppm/°C) and mechanical specifications (through-hole, PC pins, side adjustment, 25 turns). Dimensional tolerance is within acceptable engineering margins for standard PCB layouts.

Q: What is the primary difference between the PV36Z253C01B00 and PV36X503C01B00? A: The resistance value differs: PV36Z253C01B00 is 25 kOhms while PV36X503C01B00 is 50 kOhms. All other electrical and mechanical parameters are identical. Selection depends on circuit impedance requirements.

Q: Are all substitute parts ROHS3 compliant? A: Yes. The PV36Z253C01B00, 3296Z-1-253LF, and PV36X503C01B00 are all ROHS3 compliant and REACH affected.

Q: What are the packaging considerations for these parts? A: All three parts are supplied in Tube packaging. Dimensional specifications are provided in both imperial and metric units for PCB design verification.

Q: Can the PV36X503C01B00 be used as a substitute if only 25 kOhm resistance is required? A: No. The PV36X503C01B00 has 50 kOhm resistance and is not electrically equivalent for applications requiring 25 kOhm impedance. Use only when circuit design permits higher resistance values.