Equivalent & Substitute Parts for PV36P253C01B00

Part Overview

The PV36P253C01B00 is a 25 kOhm, 0.5W through-hole trimmer potentiometer manufactured by Bourns Inc. with cermet resistive material, side adjustment, and PC pin termination. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the same or compatible product series.

Substiute Parts

PV36P253C01B00

Bourns Inc.In Stock: 1146PV36P253C01B00 Datasheet

Current PartRFQ

3296P-1-253LF

Bourns Inc.In Stock: 22133296P-1-253LF Datasheet

DirectRFQ

PV36X503C01B00

Bourns Inc.In Stock: 2758PV36X503C01B00 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the PV36P253C01B00 are categorized based on electrical and mechanical compatibility:

Direct Equivalent (Electrical and Mechanical Match): The 3296P-1-253LF maintains identical electrical specifications: 25 kOhms resistance, 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, and 25-turn side adjustment. Both components use cermet material, through-hole mounting, and PC pin termination. Physical dimensions are within acceptable tolerance (9.53mm x 4.83mm versus 9.60mm x 5.00mm). Both are ROHS3 compliant and Active status products from Bourns Inc.

Similar Series Alternative (Resistance Variation): The PV36X503C01B00 belongs to the same PV36 series but specifies 50 kOhms resistance instead of 25 kOhms. All other parameters remain identical: 0.5W power rating, ±10% tolerance, ±100ppm/°C temperature coefficient, 25-turn side adjustment, cermet material, through-hole mounting, and PC pin termination. This part is applicable only when circuit design permits the higher resistance value.

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution: The 3296P-1-253LF is the primary equivalent substitute for the PV36P253C01B00. Both components maintain identical electrical performance and are classified as Active products with ROHS3 compliance. The 3296P-1-253LF is part of the Trimpot® 3296 sealed series, offering enhanced environmental protection. Selection between these two parts depends on application-specific requirements for sealing and series preference, as electrical performance is equivalent.

For Resistance Variation Applications: The PV36X503C01B00 is applicable only when circuit design specifications require 50 kOhms resistance. This part maintains all other electrical and mechanical parameters identical to the main part. Use this substitute only when the higher resistance value is functionally acceptable within the circuit design.

Compliance Considerations: All three parts are ROHS3 compliant and REACH affected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Frequently Asked Questions (FAQ)

Q: Can the 3296P-1-253LF be used as a direct replacement for PV36P253C01B00? A: Yes. Both parts specify identical electrical parameters: 25 kOhms, 0.5W, ±10% tolerance, ±100ppm/°C temperature coefficient, and 25-turn side adjustment. Physical dimensions are within acceptable tolerance. Both are ROHS3 compliant Active products from Bourns Inc.

Q: What is the primary difference between PV36P253C01B00 and 3296P-1-253LF? A: The 3296P-1-253LF belongs to the sealed Trimpot® 3296 series, while PV36P253C01B00 is part of the standard PV36 series. Electrical specifications are identical. The sealed design of the 3296P series provides enhanced environmental protection.

Q: When should PV36X503C01B00 be used instead of PV36P253C01B00? A: The PV36X503C01B00 specifies 50 kOhms resistance compared to 25 kOhms in the main part. Use this substitute only when circuit design requires the higher resistance value. All other parameters remain equivalent.

Q: Are all three parts compatible with the same PCB footprint? A: The 3296P-1-253LF and PV36P253C01B00 have compatible through-hole PC pin termination with dimensions within acceptable tolerance (9.53mm x 4.83mm versus 9.60mm x 5.00mm). The PV36X503C01B00 has slightly larger dimensions (10.00mm x 5.00mm) but maintains the same through-hole PC pin termination and should be compatible with standard PCB layouts designed for 0.5W trimmer potentiometers.

Q: Do all substitute parts meet the same regulatory requirements? A: Yes. All three parts are ROHS3 compliant and REACH affected, meeting current regulatory standards for electronic component manufacturing and distribution.