PV22-2R-CYY Equivalent & Substitute Parts

Part Overview

The PV22-2R-CYY is a ring terminal connector manufactured by Panduit Corp, classified within the Pan-Term® series. This component is a circular ring terminal designed for 22-26 AWG wire gauges with a #2 stud connection point. The terminal features insulated construction with vinyl material and tin-plated copper contacts. The product is currently listed as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this connector type.

Substiute Parts

PV22-2R-CYY

Panduit CorpIn Stock: 814PV22-2R-CYY Datasheet

Current PartRFQ

P22-2R-M

Panduit CorpIn Stock: 2388P22-2R-M Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the PV22-2R-CYY is determined by the following critical parameters:

Core Compatibility Parameters:

• Terminal Type: Circular
• Stud/Tab Size: #2 Stud
• Wire Gauge Range: 22-26 AWG
• Termination Method: Crimp
• Contact Material: Copper
• Contact Finish: Tin
• Manufacturer: Panduit Corp
• RoHS Compliance: ROHS3 Compliant

The substitute part P22-2R-M maintains all core compatibility parameters with the main part. Both components share identical wire gauge specifications, stud size, termination method, contact material, and contact finish. Both are manufactured by Panduit Corp and comply with ROHS3 standards. The primary differences between these parts relate to insulation construction, physical dimensions, and product status rather than electrical or functional compatibility for the specified wire gauge and stud connection.

Parameter Comparison

Engineering Selection Recommendations

The P22-2R-M serves as the active equivalent for the obsolete PV22-2R-CYY. Both components are manufactured by Panduit Corp and maintain identical electrical specifications for wire gauge (22-26 AWG), stud size (#2), contact material (copper with tin finish), and termination method (crimp). Both parts comply with ROHS3 standards and are classified under the same HTSUS code.

The primary distinction between these parts is insulation construction. The PV22-2R-CYY features insulated vinyl construction, while the P22-2R-M is non-insulated. This difference affects application suitability based on circuit design requirements. The P22-2R-M also exhibits slightly reduced overall length (0.520" versus 0.680") and marginally reduced width (0.205" versus 0.210"), which may influence physical fit in space-constrained installations.

The P22-2R-M is currently in active production with significantly higher inventory availability (2319 pieces versus 735 pieces for the obsolete part), ensuring reliable supply chain access. Both components maintain identical compliance certifications and regulatory status.

Frequently Asked Questions (FAQ)

Q: Can the P22-2R-M directly replace the PV22-2R-CYY in all applications?

A: The P22-2R-M shares all core electrical and functional specifications with the PV22-2R-CYY, including wire gauge range, stud size, contact material, and termination method. The primary difference is insulation construction. Applications requiring insulated terminals must account for the non-insulated design of the P22-2R-M. Physical dimensions differ slightly, which may affect fit in space-constrained installations.

Q: What is the significance of the insulation difference between these parts?

A: The PV22-2R-CYY features vinyl insulation, while the P22-2R-M is non-insulated. Insulation provides electrical isolation and mechanical protection. Selection between insulated and non-insulated terminals depends on circuit design, voltage requirements, and environmental conditions. Non-insulated terminals are suitable for applications where insulation is not required or where the terminal is protected by other circuit design elements.

Q: Are both parts compliant with current regulatory standards?

A: Both the PV22-2R-CYY and P22-2R-M are ROHS3 compliant and REACH unaffected. Both are classified under ECCN EAR99 and HTSUS code 8536.90.4000. Regulatory compliance is equivalent between the two parts.

Q: What are the physical dimension differences between these parts?

A: The PV22-2R-CYY measures 0.680" in overall length and 0.210" in width. The P22-2R-M measures 0.520" in overall length and 0.205" in width. Both maintain identical thickness of 0.020". These dimensional differences may affect installation in applications with specific spatial constraints.

Q: Why is the P22-2R-CYY listed as obsolete?

A: The PV22-2R-CYY is classified as obsolete, indicating it is no longer in active production. The P22-2R-M represents the active equivalent within the Panduit Pan-Term® series, offering the same core electrical functionality with current manufacturing support and supply chain availability.

Q: What packaging differences exist between these parts?

A: The PV22-2R-CYY is supplied in standard packaging, while the P22-2R-M is supplied in bulk packaging. Bulk packaging typically accommodates higher-volume procurement requirements and may offer cost advantages for large-scale applications.