PV18-6LF-E Equivalent & Substitute Parts

Part Overview

The PV18-6LF-E is a red insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 18-22 AWG wire onto a 6 stud. This component is classified as obsolete, indicating it is no longer in active production. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing maintenance and repair operations for systems utilizing this terminal connector.

Substiute Parts

PV18-6LF-E

Panduit CorpIn Stock: 1241PV18-6LF-E Datasheet

Current PartRFQ

PV18-6LF-CY

Panduit CorpIn Stock: 1104PV18-6LF-CY Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the PV18-6LF-E is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part must satisfy the following criteria:

Electrical Parameters:

• Wire gauge range: 18-22 AWG
• Stud size: 6 Stud
• Contact material: Copper
• Contact finish: Tin
• Terminal type: Spring, Snap

Mechanical Parameters:

• Overall length: 0.900" (22.86mm)
• Outer edge width: 0.270" (6.86mm)
• Tongue inside opening: 0.140" (3.56mm)
• Insulation diameter: 0.150" (3.81mm)
• Mounting type: Free Hanging (In-Line)

Material & Compliance Parameters:

• Insulation material: Vinyl
• Insulation status: Insulated
• Color: Red
• Termination method: Crimp
• Features: Brazed Seam, Serrated Termination
• RoHS compliance: ROHS3 Compliant

The substitute part PV18-6LF-CY meets all specified parameters and is therefore a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The PV18-6LF-CY is a direct functional equivalent to the PV18-6LF-E. Both parts are manufactured by Panduit Corp and share identical electrical, mechanical, and material specifications across all critical parameters. The primary distinction is product status: the PV18-6LF-E is obsolete, while the PV18-6LF-CY is active in production.

For new designs and ongoing procurement, the PV18-6LF-CY is the appropriate selection. Both parts maintain ROHS3 compliance and are suitable for applications requiring 18-22 AWG crimp termination onto a 6 stud with tin-plated copper contacts and vinyl insulation.

The substitute part is available in active inventory and represents the current production equivalent of the obsolete PV18-6LF-E.

Frequently Asked Questions (FAQ)

Q: Can PV18-6LF-CY be used as a direct replacement for PV18-6LF-E?

A: Yes. The PV18-6LF-CY is a direct equivalent. All electrical parameters (wire gauge, stud size, contact material and finish), mechanical dimensions (length, width, tongue opening, insulation diameter), and material specifications (vinyl insulation, color, termination method) are identical between the two parts.

Q: What is the difference between PV18-6LF-E and PV18-6LF-CY?

A: The only difference is product status. The PV18-6LF-E is obsolete and no longer manufactured. The PV18-6LF-CY is the active production equivalent and is the recommended part for current procurement.

Q: Are both parts RoHS compliant?

A: Yes. Both PV18-6LF-E and PV18-6LF-CY are ROHS3 compliant.

Q: What wire gauge range does this terminal support?

A: Both parts support 18-22 AWG wire termination.

Q: What is the stud size for these terminals?

A: Both parts are designed for 6 stud termination.

Q: Can these terminals be used for applications other than 18-22 AWG?

A: No. These terminals are specified for 18-22 AWG wire only. Using wire outside this gauge range will result in improper termination and connection reliability issues.

Q: What is the contact material and finish?

A: Both parts feature copper contacts with tin plating, providing corrosion resistance and reliable electrical conductivity.

Q: Is the insulation material the same for both parts?

A: Yes. Both parts use vinyl insulation with an insulation diameter of 0.150" (3.81mm).

Q: What termination method is required?

A: Both parts require crimp termination. The serrated termination feature aids in wire retention during the crimping process.

Q: Are these parts suitable for high-vibration applications?

A: Both parts feature spring snap terminal design and brazed seam construction, which are standard for general-purpose electrical connections. Application-specific vibration requirements should be evaluated against the mechanical specifications provided.