PV18-6FF-CY Equivalent & Substitute Parts

Part Overview

The PV18-6FF-CY is a red insulated spade terminal connector manufactured by Panduit Corp, designed for crimp termination of 18-22 AWG wire onto a 6 stud. This flanged terminal features a brazed seam construction with tin-plated copper contacts and vinyl insulation. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this terminal type.

Substiute Parts

PV18-6FF-CY

Panduit CorpIn Stock: 777PV18-6FF-CY Datasheet

Current PartRFQ

PV18-6F-CY

Panduit CorpIn Stock: 1670PV18-6F-CY Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete PV18-6FF-CY is based on the following critical parameters that must remain constant across equivalent parts:

Mandatory Matching Parameters:

• Stud size (6 Stud)
• Wire gauge range (18-22 AWG)
• Termination method (Crimp)
• Insulation material and color (Red Vinyl)
• Contact material and finish (Copper with Tin)
• Manufacturer series (Pan-Term®)
• Compliance certifications (ROHS3, REACH Unaffected)

Allowable Variations:

• Terminal type classification (Flanged to Standard)
• Dimensional tolerances within functional equivalence
• Packaging configuration (Bulk vs. other formats)
• Product status (Obsolete to Active)
• Additional features (Serrated Termination addition)

The substitute part PV18-6F-CY maintains all mandatory parameters while offering an active product status and enhanced serrated termination feature.

Parameter Comparison

Engineering Selection Recommendations

The PV18-6F-CY is the direct substitute for the obsolete PV18-6FF-CY. Both parts maintain identical wire gauge compatibility (18-22 AWG), stud size (6 Stud), and contact specifications (Copper with Tin finish). Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements.

The primary distinction is product status: PV18-6FF-CY is obsolete with limited remaining inventory (762 pieces), while PV18-6F-CY is active with substantially higher availability (1640 pieces). The substitute incorporates serrated termination as an additional feature, which enhances mechanical retention without compromising electrical performance.

Dimensional variations between the parts are minor. The substitute has a slightly larger outer width (0.300" versus 0.280") and a reduced tongue inside opening (0.150" versus 0.190"), with negligible overall length difference (0.860" versus 0.870"). These variations remain within functional equivalence for standard 6-stud applications.

Selection of PV18-6F-CY ensures continued access to Pan-Term® series spade terminals with full regulatory compliance and improved long-term supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can PV18-6F-CY be used as a direct replacement for PV18-6FF-CY?

A: Yes. Both parts are rated for 18-22 AWG wire, feature 6-stud termination, and use identical contact materials and finishes. The substitute maintains all critical electrical and mechanical specifications required for equivalent performance.

Q: What is the difference between "Flanged" and "Standard" terminal types?

A: The PV18-6FF-CY is classified as flanged, while the PV18-6F-CY is standard. This classification reflects terminal geometry variations. The substitute's standard configuration is functionally compatible with 6-stud applications.

Q: Why does the substitute have a smaller tongue inside opening?

A: The PV18-6F-CY has a tongue inside opening of 0.150" compared to 0.190" on the main part. This dimension is within acceptable tolerance for 6-stud connectors and does not affect compatibility with standard stud sizes.

Q: Are both parts compliant with current regulations?

A: Yes. Both PV18-6FF-CY and PV18-6F-CY are ROHS3 compliant and REACH unaffected, meeting current environmental and safety standards.

Q: What is the significance of the serrated termination feature on the substitute?

A: The PV18-6F-CY includes serrated termination, which provides enhanced mechanical retention of the crimp connection. This feature does not alter electrical performance and improves connection reliability.

Q: Does packaging differ between these parts?

A: The main part PV18-6FF-CY is listed with unspecified packaging, while the substitute PV18-6F-CY is supplied in bulk packaging. Verify packaging requirements for your application.

Q: Why is the main part listed as obsolete?

A: Product obsolescence indicates that the manufacturer has discontinued active production. The substitute PV18-6F-CY is the active equivalent, ensuring continued availability and support.